Search results

Minimum 8k. Possibly more if the new chassis is galvanised.

I'd stay in Africa. Seriously.

A friend of mine just bought a camper van for £17k. It's worth £7k at most. Put any price you want and you only need to get lucky with a fool, once.

That's how my setup is at the moment. Would be nice to replace the mechanical pump but then you have the timing to consider if you remove the mechanical pump. Shorter belt? Idler pully? Seems a bit of a headache unless you leave the mech pump in place.

Sounds great, I had no idea you could do that. 🤔

The quality of everything is getting worse. That's not a cynical opinion, it's a fact documented by consumer watchdogs, vloggers, bloggers, and the media. So it wouldn't surprise me if the quality of modern diesel pumps is now crap. So no diesel pump at all? How does the pump regulate the flow...

Loctite SI5980

If you're in North Wales I can weld it up for you.

Kumho AT52. Much quieter than the mud pluggers the last own had on mine. Wearing very well. Good in the dry and wet. Only driven on grass and gravel as "offroading" goes and they were absolutely fine.

:D

You just need a louder engine. I don't ear any wind noise from my roof rack :D

I suppose the only real way is check your impeller against an original and see if they differ. From what I've seen it's the angle of the vanes that get's the whistle. Alternatively, take it to a turbo specialist and see what they say.

You can actually buy aftermarket impellers specifically to get a whistle. Quite the thing in the US pickup community Check your impeller isn't chipped or bent, maybe? That seems to be where it originates from.

If it was a mechanical diesel; isuzu, 200tdi, etc, I wouldn't worry about it. A TD5 and later aren't as robust. I'd be inclined to follow miktdish's idea. Drain some and top up. injector/pump seals are fine, they'll be nitrile or viton.

Some use what miktdish posted. I prefer a wire wheel on an angle grinder https://www.screwfix.com/p/titan-multi-material-wire-wheel-brush-100mm-3-93-/239PR?tc=AB8&gStoreCode=AB8&gQT=1 I know you cant take the body off to check some of those places, but you should do your best to check them...

You're looking in the wrong places.

Anything that's red and says ATF.

Odd, as my Isuzu 2.8 sits fine without modding the bonnet. I fitted the top mount intercooler and it still missed the bonnet, though I cut a hole anyway for the bonnet scoop.

How do you know you're down on power? Because it's noticable, or because a Rolling Road told you? If a RR told you it was 190, did the exact same RR tell you it's now 160? You can get VASTLY different results from RR to RR.

Do you really? I thought it would work as good sound deadening. My son used it on his camper, hence why I posted it. Not sure of the sound deadening properties, personally.