Search results

all o.k

mouldable plastics such as formcard,polydough or the one pictured are the biz,i have repaired the insides switches etc and are ideal for the nylon panel inserts,

it looks like the one, atb

heres a couple of pics of my drivers side mount area ,it has a wedge shaped bracket between the chassis and rubber mount, the mount bolts x1 to this and then the bracket bolts x2 to the chassis,post 11, chassis pics shows these holes, hopefully this was of some help to you, good luck and all the...

i searched electronic ignition on here,lots of advice and first hand reviews,iirc i think i went for powerspark but best to read up the threads as there are lots of in and outs,

after rebuilding my 88 petrol engine i am just about to change the running in oil,i am going with a classsic mineral oil, any branded one in a metal can, opies have a couple on their site that look suitable, i may stretch to castrol for the first fill i read that changing to a detergent oil a...

+2, on my '69 petrol 88 i fitted a new coil,leads + electronic dizzy but also bought a new weber carb £120ish and oilbath filter as i couldnt get it running right with the ignition upgrades alone and it transformed the old girl, maybe the weber might not be suitable for your climate but others...

at the moment i have a spare 3.54 diff sitting in my workshop doing nothing, i will be fitting it just to see for myself first hand how it goes as the reviews are varied, if i am happy with the setup i will fit the same on the front and weld a new diff pan on with the filler hole on the rear,my...

thanks, it was an earlier post by yourself that gave me the tip regarding the oil filling.

thanks,oil in through the hub end then, as a small and simple job invariably leads to more on these would it be advantageous to buy any seals which may get accidently damaged in advance, if so any pointers to which seals to order in a worst case scenario, Ryn

i will be fitting an experimental 3.54 rear diff fairly soon and would it be ok to use blue hylomar as a sealent on the mating surfaces?,, initially i am only fitting the rear as i want to see if i get on with the new characteristics before i commit to the full changeover, regarding the oil, i...

i think it comes as part of the lower door, the pic is from lrworkshop,and no individual part is listed,

i fitted the anti burst locks of a later model on my '69 station wagon, its a good safety upgrade if carrying grandchildren or similar

i have a set of something similar to these damaged bolt/nut removers, they have never failed to do the trick on many a vehicle,they are under 14 quid at screwfix. a must for any toolbox, good luck,

possibly your master cylinder is kapuut, it could be too much fluid,jamming calipers or a few things go for a drive about and feel the temperature of your wheels as close to the brakes as poss,they should all feel the same but if one is hotter then you may have a jamming caliper and its boiling...

i fitted 'rocky mountain' parabolics on mine with cheap britpart dampers,, the rocky mountain website has good info regarding fitment which is relevant to other spring manufacturers,i would advise putting the propshaft angle correction shims between the axle and springs, it is an easy job, i...

maybe of some use to you, try googling 'expedition land rover, lucas wiring colour codes' it has the wiring colours and what they do, good luck

hi, welcome to the forum ,sounds like you have some serious problems,is the red lever in the right position and where did you buy it how much did you pay?, any pics?, Ryn

i dont think the rear matter but could be wrong, i did mine and really struggled by myself so be carefull, i had mine on blocks at each end and inbetween, when i ordered my parts i found these guys,, l.r.series land rover parts website they have good pics of the ubolts listed with the...

mot history checker shows a fail due to rot and then a pass with no extra mileage and advisories for discs and pads!!,i would presume the dealer acquired it in good faith, i have seen a few similar 'conversions' at local agricultural events/shows