Search results

Worked in Russia for couple of years, this is the marker for the circle in middle of summer near Novy Urengoy, minus 40 in winter, all diesel is cut with aviation kerosene to keep things running............and no local LR dealers within 2000 miles.

Thanks for the clarification, have the Fairey on two of mine and was confused about the through seatbox configuration.

Seems some of the guys are familiar with this type of overdrive unit in a series vehicle, but I am curious about the 'popping through seat box'.......what make of overdrive is it?

What vehicle do you have?......have you checked the search facility, same issues were dealt with in detail recently.

Some round here would say yes. have yu taken off the oil filler cap and looked for the emulsified oil? White smoke-water Blue smoke-oil Black smoke overfuelling Is it still misfiring?

Sorry, but blaming an imaginary mate does not get any sympathy on here, been tried before:) I take it you had no snorkel fitted, in which case you may have screwed the engine with intake of water through the air filter, which does not compress in the cylinder and causes valve...

Plenty of advice if you use the search section for the speedo fix. Lowering tyre pressure will indeed make a difference with worse handling, poor cornering and shortening of the tyre life, so not much to recommend that route. New parabolic's are supposed to help. I have one with and two...

What grade is the tube?....you will have to calculate the total weight of the finished frame and make a judgement if that is what you really want. For sure, hanging a 150 kilo's of additional mass up and over the top of the vehicle will reduce the stability of the vehicle on slopes and then...

A roll cage is there for safety reasons, function before form is the important thing to consider. Not much use if it just looks pretty when the vehicle rolls over..........internal/external, full/short, so many variations to be considered..........material types!. Have a look through the mags...

Just been down that route with one of mine..........lots of sucking of air through teeth from the mechanic, after pushing him on the subject he conceded that easier for him to replace than repair as labour costs would eat up any savings on the refurbishment option. I could be wrong but there's...

My 2004 Series 11 Discovery has started a similar problem. First thought from the garage was the ACE, however this proved not to be the case, having eliminated the steering damper, bearings, etc, suggestions now seem to be pointing to tyres as some owners had reported 'squirrley' handling with...

Doobie.......assuming your not in the 'Broch', get over to Kirkstyle in Kemnay (Independant land Rover) speak to graham the mechanic, good chance they have the right bits in stock, will save you filling your shed with wrong parts. I've found them cheaper than the mail order route and they will...

Welcome to the 419 Eater Battenburg posted this link if you want more fun with your scammer.

so who are they?:)............dammit, not quick enough.

Yep, he's been a busy boy............have set up my fax machine to start calling his mobile number at 1am for the next week.:D

I really doubt that you will find any motor factor or distributor with cellulose paints on the shelf these days, and even then will sell to trade customers only. This because of the new legislation coming into force on 1st Jan, 2008. which has effectively killed off all solvent based vehicles...

What he says!

I am assuming you are referring to the MOT test? Each MOT station seems to apply their own interpretation of the guidelines, my local one (which handles a large volume of farmer owned) will not pass a vehicle which has had more than 20% of the original patched or repaired, also any repair...

600 grade wet and dry, if you got through to bare metal you will have to spot prime those bits, mini foam roller will do the job fine, brushing enamal is available from craddocks, just keep laying it off gently until the bubbles are gone.:)

It only becomes a problem if he buys it..........for the moment he's only at the negotiation stage and that makes it issues up here.:)