Search results

I'm still good, shd be at the meet by 8.30ish

put my first half tank of veg oil in :eek: acceleration was a bit different but I'll put that down to all the fuel tank sludge shifting about :rolleyes:

you either do lots of mud, in which case the rest of ur motor will be be filthy so wots the point of these? or you do no mud, again, so wots the point of these? 35 quid is best spent down the pub :D

yip, one to bell housing and other to timing case. just get underneath and look for the two empty holes ;)

my missus says size isn't important :rolleyes:

I'm coming nowhere near ur motor :eek:

adjust the lock stops until the tyres don't catch no more ;) don't cost nuffink :D

diskloks offer something visual that'll slow the thieving gypos down a bit, lots of folks on here have em

it should be on the front but they don't all have one, mine doesn't. you can get a replacement plate with a pushfit connection

did u check ur earths? cos I fink that might help cure some of ur probs. although #### it, may as well get a shiny new rad :D

wots an empty cave got to do wiv it?? :confused:

U obviously haven't been on here v long :D

dog **** lane?? :confused:

knob? I'm not the one who wasn't able to get the plate of my tbox. and I'm also not the one who doesn't seem to have a clue about how to go about checking it out properly. would you turn up at a garage and ask as many stupid questions and expect not to be either charged for wasting their time...

its ####ed, burn it

yip, sounds good. prob gonna sit at 60 on the motorway all the way

mine sits just under halfway normally. I had the problem a while back that if I switched headlights/heater on the temp needle went up. after a #### load of hassle turns out to be an earthing problem with front bulkhead ;)

ummm don't fink too many folks on here run vogues :cool:

I've got a maxon cm10, already had the rig, just had to get the mount and antenna sorted. seems to be a good un so far

first thing is to check earth straps and clean them up. I had problems with headlight fuses blowing and after a long time found out the the front bulkhead wasn't earthed properly