Search results

Ok I will have a look

Is that grap on the obd socket

Nanacom no comunication with the abs ECU.sounds like ECU

What about the abs pump noise

Behind glovebox

Where is the abs ECU.?under seat or behind glovebox

A new fuse box in this car.

Hi I have a abs light on 1 of my p38s nanacom says right hand sensor gap but ring was damaged put new ring on and new sensor still got fault.the other problem i have is when i press the brakes there is a grunting noise when I press the brake pedal sometimes it goes away.now my nanacom no...

Hi guys finally got the srs light to go out ECU was buggered got it repaired by autotronics £250. I now have a fault free car for a bit anyway must say thanks to U guys for the help.

Aye but where do I keep it.no room

2 new crash sensors £500 madness

Yes I know I priced a new ECU £600

Anybody got any p38 crash sensors gems

Is the red plug on the on the rotary coupler have a 12volt feed when it's all connected up but don't connect up air bags.The same at the passenger side connection

Hi the state of play today with my srs is al srs cables good continuity except small connector under seat black ok both sides brown and green nothing and brown and black nothing all checks back to ECU connector

Just ordered a nanacom anyway

Ok should the yellow plug on the passenger side have continuity with the drivers plug and what colour is the plug going from the srs ECU to the becm

My next move is to c if I can get continuity I know disconnect the bags.

Plug for obd ok

Changed the ECU 2nd hand but said it was ok