Search results

I wouldn't recommend halfrauds unless you know exactly what you're looking for specs wise and just want a look, because most of the staff are useless idiots when it comes to advice. Try your local independent car audio retailer, they're often uber knowledgable and because they're fighting with...

Beautiful motor, good luck with the sale

Well he said 55w with the option of upgrading... So I guessed this would be a good figure to use as 100w lamps used to be quite a common upgrade and easy to get hold of (dunno if they still are, not bothered looking)

Far better than my idea! Damn my slow posting (and brain)

So if you used 6x100w lamps assuming you uprate them all (600w) at a nominal 12v (usually around 14v but we'll stick with this figure) we're pulling 50 amps alone on spots! Drop that to 60w per lamp and you're looking at 360w, which gives a more reasonable 30 amps current draw. That'd still be...

Surely you'd be best off using the main beam to trigger the spots relay and keep the main beam circuit as it is? No harm in using a slightly oversized relay to give some safety margin but ffs you're not switching the Blackpool illuminations (are you?!).

The general consensus is slipped liners are caused by overheating so make sure your coolant system is tip top and any coolant loss issues are dealt with ASAP. These old girls aren't getting any younger so hoses and seals etc can and will have deteriorated over time and a small leak can turn into...

Unreliable and leaks.... Maybe it is a proper landy after all!

Seen at least one a while back on fleabay that was chavved to the max but they are few and far between

Saabs are fairly common over here and have a fair following, particularly the 900/9000 (and later) turbos which are sought after for their performance potential when tuned. Anyway, welcome and enjoy your new toy!

We had a light dusting overnight that's almost disappeared but it's the low temps that'll cause the problems me thinks. Good if you're in the body shop trade though!

Too many people about for a quick knuckle shuffle you mean?

Wasn't this a big craze in the US not so long back?

Fitted some of these to works vans for when escorting static caravans. The quality seems **** but seem to work well enough for now. The wiring as standard is ridiculously short though, and being LED you need to be careful how you position them to get the angle right

Is fuel getting to the injectors?

Close the hood/bonnet?

And a hammer, welder and angle grinder. And a bigger hammer. Some spanners and a decent socket set will also be vital. A large hammer will be necessary too. Not to mention a jack and axle stands. Did I mention that you'll need a BIG hammer? And a selection of other hammers.

I rekun it wud luk well gd lowered on chrome 22's wiv a scooby Spoiler on da roof painted in flip paint. My mate sez if you put a k&n filter and jap exhaust on it you'll keep up wiv focus st's no probs. Also if you put a big stereo in the extra weight helps it handle better cuz it sticks to the...

Well at least you'll be used to slow noisy British engineering at its finest!! Oh and the rust. Lots of rust.

Everyone here loves britpart and rates them highly :) Congrats on the new purchase!