Search results

I did search before putting it up, cos I didn't want to appear to be a plonker. Guess I didn't enter the right terms.:p

Parts list (some russian, can be translated using google translate) looks like a pretty good reference site from our comrades in the USSR!:D also has exploded drawings of parts, very useful for seeing how it goes together!

found this, hope it helps: Quick fix: Oil Filter Housing leak check Thing is, I have this problem on my 200TDI, yet it refers to 300TDI on page. could I use this guide to diagnose my problem?

Hi smurf, your a bit unclear: when you say strobs to go with your becons are you talking about indicator lights or like emergency lights? Also: change the pulse by touching live or earth...when driving LEDs, especially for strobe effects, that can mean 2 things. either way you can't drive LED...

How to drive a landrover part 1 How to drive a landrover part 2 pay attention now!:D

Smashing! Cheers buddy!:)

Thanks just to show you the problem: so the bit between the flange and the diff is the mud shield yeh? Here's all the oil flung over the axle area:

got a problem. My diff pinion oil seal is leaking again. Now I may have bought the wrong one last time I'm not sure. So is there anything on the differential that could tell me which seal is needed (stamped numbers, etc.) Its a 4 bolt flange on a 20-odd spline shaft (gave up counting...

just had a look at that: MOT Documentation Contents Page section 3.1 of the light commercial and private vehicle MOT inspection manual mentions nothing about the number of clicks, but does say it can be failed if its at the end of its working travel.

Definitely. I did notice you mentioning this in a lot of peoples posts. So i took your word and slackened off the cable first then did the shoes, then tightened up the cable again. Flare nut spanner is what you want. or you can butcher a closed face spanner.

This is more for the newbies. (and for those directing newbies to the right page) The other day, I found that my handbrake wasn't to its usual standards (not good when your trialing on a 1:3 hill!) did some poking around on here, and even buster bus had no pictures of the adjuster and...

I'm good now mate ta, got one donated to me as a present for the barin, he now owns 1% of me motor adn he's only 3 months!:D

Chris is feeling blue and needs a little rest - YouTube bit of a fall over the other day!

Wire-Gauge Ampacity - Transwiki this list should help with picking the right wire :)

Me BB Cannon Fodder - CCV trailer me and me mate built

I really should get that wheel wobble thread made up to be stickied

mud or dirt shield this you mean?

there no good on a bench y'know! they should be on your motor! I feel you pain buddy: been there and cured it! http://www.landyzone.co.uk/lz/f16/s-t-me-pink-bad-wobble-problem-176753.html There is one thing I'll ask, did you put all the shims back on when tightening the swivel pins up? if so...

its a triple pole change over relay. its this "fancy" design, which is quite old, cos it fits into the old thermal valve bases. might be an AC coil (110V or 240V - check) they sell them and their bases at maplin: Round-base 10A Relays : Power Relays : Maplin Electronics I used one for a self...

in which case i'd redo the buggered wires