Search results

make sure your sender unit is connected right and reads the right levels......mines still saying full....after 100miles!

might be able to help: door: Push the switch in the sill in hard and jiggle it a bit. see if it works. if not check the connectors have not come of the switch. if it is connected, pull the switch out, check it with a multimeter beep function, if working, its your loom, if not replace switch...

Room for one more buddy?.......:pop2:

its either a resistor or a diode. heres a quick way to check. hook one end to bat+ and connect other end to a low power bulb and then from bulb to bat-. see if the bulb comes on or not. then flip the connections round on the device and repeat. If the bulb lights again, you have a resistor...

thats a pizza dish sixed hole saw there! Where'd you get that? could do with one.

with what you save on insurance, you may end up spending on maintenence, but that'll all depend if your will to buy a lemon on the cheap and put a bit of work in to get it up to spec and put the graft in. 200/300tdi would be a good engine to go for.

aren't the TC sensors on near the brake disc's on each wheel with these? not up on freelanders, but if so: I'd start looking there to see if owt looks wrong

yeh, the back window was caked in mayo (oil and water had mixed up)....so you would have thought

1. WTF 2. WHY? 3. £99 starting bid.......optimistic looks like its been started and then he reliased he was making a big hash of things!

Had a thunk yesterday after i saw a bus on the a64 with a fountain of oil and water pouring out the back of it (practically covering my windscreen). I tried to notify the driver by pointing, only to get a look of: "WTF do you want, nutjob!?" so it lead me to thinking, how else do you get a...

Same problem, same setup. Your in luck buddy! my cable had sheared at the dashboard end, so I had to shell out for a new one. I bought a disco one to match the gearbox but it fit the speedo on the defender dash. my replacement one was plastic and metal, compared to the all metal one I removed...

I thought bio-diesel was just use veg oil and white spirits?

electronic engineer......oh and I can repair welding equipment.

well doing what I can with what I got, cheers for the help.

oooohhhh, she's a bit tasty!

That'd be a couple of PLRC members and friends and possibly me, we'd just finished at 3 ish. finished quite early come to think of it, we're usually out till dusk. aye. I've seen you Paulmitchell1984, "Hangover", rangie bonnet for a roof! You missed a good one at Rocking Stones.:)

heard that way too, but not got a means to get it that hot

right I don't have a press, but I need to replace me Panhard rod bushes. Not got poly bushes, I bout a pair of Britpart standard ones. since I've not got a massive press to hand I thought of doing the following: remove the panhard rod, take a drill with a small bit and drill out the rubber...

PLRC were at rocking stones (just outside of hudds) on sunday......if you saw a big blue sIII 90 cab hybrid, that will have been me!:bounce: Place is like the sodding moon! rock and dust! good day out though. We ain't that competitive, but we do have a bloody good laugh!

I am on my first landy, and am already think about this when i do finally manage to pass it on (how much would I get for it, will I regret it). Not to say I won't get another one.....:D