Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. L

    Freelander 1 White Smoke

    Afternoon Nodge Finally got to the cause of the issue - should have started with what you suggested first time the injectors! Carried out leak test and all were found to be equal with no variance Changed LP pump/filter and air flow meter ran the car perfect A few days later on a longish journey...
  2. L

    Freelander 1 White Smoke

    Afternoon Nodge thanks for coming back so quickly Is it possible that the relay could be breaking down or the EDC supply signal? Also following your suggestion would the pump operate via normal key operation Have you come across this fault mode before? Kind Regards
  3. L

    Freelander 1 White Smoke

    99999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999g Afternoon Nodge Both Maf & Fuel rail sensors/voltages have been checked and are within specifications In regards to the LP pump it...
  4. L

    Freelander 1 White Smoke

    Morning Nodge Thats great information many thanks for the rapid responses Will get the garage to look at these areas next week Appreciate your assistance Kind Regards
  5. L

    Freelander 1 White Smoke

    Morning Nodge Thanks for coming back Could one of the injectors be failing intermittently as when the car came back started perfectly drove to the garage for diagnostics and back again no problem It does short/medium journeys no problem but appears to struggle around the 70 to 80 mile range...
  6. L

    Freelander 1 White Smoke

    Morning All Wonder if anyone can shed any light on a problem my daughters freelander 1 experienced at the weekend Its a 2006 2.0 TD4 with M47 engine The car was driving perfectly for over 70 mile then she noticed a noise from the middle of the engine bay that she described as like a small burst...
  7. L

    M62 Cylinder head install

    Morning Saint Many thanks for your time and effort locating the required part very much appreciated Additionally thanks to the members welcome messages also Kind Regards
  8. L

    M62 Cylinder head install

    Evening Saint it looks like them but now appears like there is two items? Is the 6397B a non return valve and the HM1 6800 the O ring?
  9. L

    M62 Cylinder head install

    Thats the one but is says LH head - is that the LH in the diagram?
  10. L

    M62 Cylinder head install

    The manual does not give a part number it just says fir a new one! Have asked British Car Parts and Rimmer Bros but they are at a loss as to the identification of the o ring
  11. L

    M62 Cylinder head install

    The LR workshop manual LRL0477 is shows a picture of the head with an O ring to be installed just back from the vanos inlet sprocket
  12. L

    M62 Cylinder head install

    Good Afternoon All Many thanks to Hippo for assisting in the right area to post! Just joined the community and am seeking guidance on a particular item regarding the M62 cylinder head Am ready to re-install but the manual states an O ring is required but am at a loss of locating the item...
  13. L

    M62 Cylinder head install

    Good Afternoon All Just joined the community and am seeking guidance on a particular item regarding the M62 cylinder head Am ready to re-install but the manual states an O ring is required but am at a loss of locating the item through the spares network Additionally have been informed there...
Back
Top