Search results

oh yeah i know what you mean Riggwelter.

the tyre place recommends them

on mine at the drivers side front i shake the wheel and it has a wobble

i use crossply indian made MRF trye

i like imgur it still seems to work with third party sites

imgur

i am getting sick of photo bucket

i cant see any pics uploaded via photo bucket

oh man

ok so you want to use carpet

that sounds like a fuel problem

very interesting read

get the chassis cleaned thoroughly and then do a good check on the chassis and if you see a lot of rot all over the chassis then maybe a replacement would be good, and if you buy a galv one get the outside painted to prevent the salt and high or low alkaline dirts and ferts breaking down the...

as for the rad panel, just cut the bottom out and weld in a L piece or similar and for the steering they can wonder but not too hard but you will get used to it, but the asking price could be a bit high cause just because it has a gal chassis and bulkhead dont mean it has other major issues, i.e...

oh and also mine had oil already in

i just changed a steering relay over

damn it was done up back in 1968 and i wonder if it has been inside a good shed or somewhere dry as there would be rust under the body most likely.and the engine bay looks quite old same for other bits and pieces, i think its asking price is a little high but if done up or refurbished would get...

i do mine every 6 months or 3000mi

oh ok then,

i have hardy spicers on my Series 2 a and i just assumed they were originals, but maybe an aftermarket set the previous owner or should i say the owner before the previous owner, as i have had it for 12 years now.