Search results

Over the last six weeks I noticed a knocking noise when pulling away and heavy braking, I done the usual checks, suspension, drive train shockers, loose panels/wheel arches and started scratching my head so I found a quiet car park and opened the door and stuck my head outside to get a clearer...

This could be a breakthrough of the 2000rpm syndrome

glad you got it sorted, incidental, did you fit brand new injectors or refurbished ones.

the second or third post was spot on, switch the heaters off and open a window before you park up for the evening

Cool and thanks for getting back

So upon start up the hippo has a little bit of piston slap Probably big end rumble

You can get a product called glue and tar remover for cars, it won't damage paintwork if it hasn't been sprayed with aerosols, while you are at it run a hot air gun over the plastic bits to bring them back like new but stay away from glass.

Is She all well now ?

Just read the link below, it explains why there are different specifications of engine oil. If a can of engine oil has the correct specification on the label then that oil must comply. http://www.oilspecifications.org/acea.php

Sounds like the ignition switch

IAT sensor, had this code come when I changed the rail sensor which confused me until I discovered that I forgot to plug it back in.

My original VCU was stamped with a series of numbers, then a gap then 04 which is the age of my freelander, my replacement one now has no lettering but the tell tail ball bearing embedded in the end plate.

the common rail pressure sensor harness is another weakness and most change it with a new sensor.

ouch, I hope you didn't pay for all that ! There must have been a fault code stored if it brought the engine management light on.

Nodge68 Where did you buy your LEDs from, I might fit a set to the interior lights on mine, I see lots of them on ebay but not sure of the quality, the loose LEDs from china are good, I have converted bulbs myself to LEDs years ago but can't be asses as they are so cheap these days.

Don't feel a tit, I can remember when LED lights first came out and a mechanic working with us wired in a full set on a rear of a lorry...... six days later the penny dropped lol. We also had a batch of halogen beacons that had two black wires, wire them in one way the bulb would light and the...

Let's say you switch your engine off, pop the bonnet and check your oil level you will find it spot on for argument sake, go and make a cuppa and re-check the oil level and I bet your bottom dollar that the oil level has gone up. Why you may ask yourself, because it takes a couple of minutes...

I thought not, looks like i am going to have to fit a "C" clip or star washer then

Sorry it should say clutch master cylinder push rod clip

Can this item be purchased separately or is it a complete master Cylinder or mod