Search results

is she running on all 8 cylinders?

stupid same displacements lol

you can also look for discovery 3s with the same engine - check ebay

if it was running fine then suddenly crap I can't see it being the chip. feel the headers to see if all cylinders are actually firing (obviously not when its been running for a while). if all pipes are warm then you are getting a spark so its more likely to be a sensor. the timming...

yeah sings ****part lol

actually the 4.3 would be more suited to the range rover than a 3.5 with staged heads and cam since it would have more torque low-mid. what you plan to do with your engine is really only going to have effect over 3000rpm. it would be more expensive probably. 86.36mm crank would be around...

buy your stuff from v8tuner or V8D you should forget about getting stage3 heads, cam and new carbs and put in a 4.3 stroker kit.

the rhoads lifters you asked about in your original post. You can be a right cunit sometimes :rolleyes:

you don't need them

its only V8D/extraEFI that sell them - couple of other ECU's are avalable as plug and play. you still have to wire in the ignition loom though (also LC-1 if you want lamda control). only difference is you'll be shorter £300 buying the plug n play over a standard MS2 kit.

course he won't recomend them - he doesnt sell them lol pnp loom fits because it uses all the sensors etc that are already on your engine.

or if you want even more simplicity you can go plug and play

ans sound **** :violent:

it has a higher octane rating but it burns slower

3.9 with a distributer would be using lucas 14CUX ECU the distrubuterless engines either had GEMS (similar inlet but square) or THOR Motronic Bosch Injection which has a totally different manifold.

what make is your exhuast manifold

does it have to be one with LR stamped on it?

a viper cyclone or hurricane - maybe phone real steel for a chat. The 4.2 cam is NOT the same as the 3.9 in case someone tries to sell you one of those instead lol the specs where never released AFAIK but someone did roughly measure it - 0.4" lift, lobe seperation 112 degrees and duration of...

where did you buy it from

get rid and put a set of merlin F85s on lol