Search results

like JP says yes it can be done and its quite an easy job, i fitted a 200 wing to my 300 and it didnt take a lot to get the headlight bracket to fit. tbh the plastic wrap around under the headlight on a 300 are pretty flimsy and break pretty easily, bargain replacements can be found but seem...

possibly more to do with the gearing than the actual engine output. have had both 300 and 200tdis and dont have a problem with either although I do know some who say 200 is a lot stronger engine.

£180 a set is a little steep but anyhoo the front of the slider bolts to the bulkhead outrigger, the other bolts either side of the centre outrigger. if you have a csw then you can also bolt them to the bracket behind the seatbox but the vans/3 door versions dont have these and tbh it...

and check the link at the top of the section regarding tyre sizes :welcome2:

Not really, better to do a search

1, very possible if you know what you are looking for 2, 100 3, rust anywhere (sills, inner wings, bulkhead, boot floor, inside rear doors) and usual checks for knocking, smoking, gear changes etc.

before you think about it do a search on here. you may be surprised about the things he sells

no they either bought something like a raptor, mudstuff, rdx console. or bought a disco :p

thats one fat bird, did you have to roll her in flour? OP the disco engine is tuned for slightly more bhp so i have been told. other than that basically the same engine.

not sure as yet but have heard you can swap housings so if you already have both might be worth a try.

cat is probably worth more scrap than you may get off fleabay. if you were closer i would have bid you for it

had 265/75r16 greenway macho (same tread pattern) on my 110 last year and had no issues at all in the snow. But then i didnt think they were that bad in the wet either. Maybe its down to the driver as well as the tyre, if you are driving a 2 ton house brick with ****e brakes then its...

is all good advice on here about importing a landy into the US but sort of feel sorry for the OP here. He lives in Portsmouth UK :doh: :D

they were but then about a week after they leave the factory the tin worm gets hold of em ;)

when does he change to being an elf? :confused: all the radio stations and shops round ere have started talkin xmas already.

re-tested and this time IT PASSED :) going to replace n/s swivel bushes and pins in the near future as a matter of precaution. just got to tax it at the end of the month and go play. :D :D :D

have you had it long OP or has it just started happening while you have owned it? had a similar issue with mine but it was down to the fact that someone tried to fit a later wiper stalk (6 pin) to an early loom (5 pin). new stalk from peterborough and all sorted :) otherwise what ratty says

doesnt look bad but then it will come down to price at the end of the day. ask more about the zinc coating. If it has been stripped back to bare metal it will last a lot longer than something that has just been slapped on top of old underseal. If it is that good you could always ask the...

all good advice ;) fit whatever tyres you like or maybe do a :search: I think this may have been covered before once or twice :rolleyes:

i quoted the dimensions you gave. but were you giving the width of the vehicle or the vehicle roof though?