Search results

Yes there are two spaces to fit the relays in the fuse box It's a 1999 4.0 And no button on the HVAC

Hello all I'm looking into upgrades for my new P38, and was wondering if it's possible to fit the heated front screen to a non heated like we did in our old discovery 2. I've checked the fuse box in the engine bay and both relays are missing, however there are wires going into the slots in...

Very informative, we have replaced the air compressor, and I plugged in my own diagnostic scanner and found pressure static when filling , would this indicate an air tank leak ? I did have a pre charge pump fault code but the brakes work fine.

Il try my luck

Yes it seems to happen to them all , the mother board looks in very good condition however I believe I'm going to have to replace it.

I feel privileged, in my P38 4.0 I'm averaging 18 around town and 24 mpg on a run.

Hello everyone I have recently purchased a P38 and the window switches are slightly faulty the two rear windows work on the individual switches, however on the front switch panel one window goes down but won't go back up Also the passenger front window doesn't go down yet the drivers goes...

Extreme good value indeed

Even for a few seconds then switches off ? What would that be a symptom of ? If you know ofcourse

Yes , you can hear it turn on every time the car is turned off

Yes managed to fix it , it was the rear boot seal had become unhooked

That's definitely worth a looks as not long after we bought the car , I found the spare wheel well full of water. The spare wheel seems to cause some issues.

The compressor is brand new , we replaced it recently. Due to a previous diagnostic report.

Hello everyone again I've managed to get myself a new ICARSOFT CR MAX and plugged it into my dad's l322 mentioned in my previous posts to try and sort the air suspension inactive issues. This is the fault codes listed P0443 : STATE NONE : evaporative emission system purge control valve...

It plugged straight in , and after 12 days I can report no faults. Finally got my hands on a ICARSOFT CR MAX, so I should hopefully be able to sort my own issues.

Yes I already have still no result ,then again it's a clock spring and squib off a HSE discovery 4. Not 3

This was WD-40 contact cleaner, here is picture proof

Just a quick question, would any of the plugs under either seat have any connections to the steering wheel? If it's any help today I changed the clock spring squib and air bag and still only the cruise control worked. I have tried wd-40 contact cleaner on the steering wheel buttons to no avail.

Hello everyone Following on from a post I made months ago, I fitted a HSE steering wheel onto my GS discovery 3 and nothing worked around august last year. About a month ago I had an airbag light come on so I cleaned the connectors under my seat and on my way home last week the cruise...

If u need any more help just ask but I am new to all this l.