Search results

Brilliant, thanks a lot JamesMartin.

I have new points and cap as well just don't have the gauge for the dwell angle. Replaced leads with some rather boy racerish silicon ones, rotor arm and plugs done at same time.

Problem solved!!!! I hope.... Just went to put fuel in, literally 50 yards from my girlfriends house, was being a right tw@t to start then cut out at the pump. Filled her up, and would not start again so pushed it out of the way and begun exploring. Lift pump working, fuel filter filling, so I...

No i didn't Change the float though unless I was too heavy handed it shouldn't have changed should it? I did change the needle valve and seat though.

Today I tried sorting it. Took it to my local land rover workshop and asked for some advice he couldn't be of much help as he said he usually gets asked to take petrol engines out and replace them with a tdi. So I turned the idle down a bit put a cable tie around one of the pipes and it...

Evening all having a few troubles with my 2.5 petrol 90:o (sign a cross and run) Yesterday it overheated going through the back roads where I live so I pulled over let it cool down and removed the thermostat as I knew it was faulty. The previous owner is not in my good books as there was a...

Had 75 out my 2.5 petrol 90. Definitely wont be doing it again, thought I would become airborne very soon.

Pm sent!

Do you know if the headlining would fit and old 90? Not often someone posts on here from the same town. Lloyd

I always understood if the tester can not get his probe in then he can't fail it. If it can't be tested it can't be failed?

Where abouts did you see this series? And do you know if it was a local one? I think my dads cousin came down the other day in his.

How much for the cubby box posted?

Yea I wish I had done this first before I bought the joint to rebuild ended up buying the complete link and taking the grinder out. just make sure you buy one that's all complete...

That isn't a bad idea, doubt it will arrive before Wednesday now if I order from fleabay. Was thinking of getting a stick on front plate for the vent anyway. Thanks for all the input. 90 is now at the forge awaiting footwell and tranny tunnel welding before Wednesday.

My 90 is almost ready for the MOT but before I take it to the test station on Wednesday could anyone tell me wether they think this will fail? It looks like water has gotten between the acrylic layers in the rear plate. http://www.flickr.com/photos/93654476@N07/9006348854/lightbox/ Cheers

My mums Audi used to do it on a long journey, all of a sudden it would lose all power so we would pull over open the cap and a big 'whoosh' of air would come out and all would be fine. I think it's hot diesel returning from the pump to the tank expanding the air and air locking the lines. Maybe...

G4 orange... What is the name of the green yours is now? I like it.

Ohh hell. Possible this could have been factory as they changed from the 2.25 to 2.5?

Can't get to the Landy at the minute? Looks a lot like this. But mine is coppery in colour and about 25 years older It's on the near side wing, on top or the washer bottle...

Hi all, I have been meaning to ask this for a little while now, after I bought my 90 and towed it back to my Nans field, I noticed something in between the carb and the fuel pump. It's a cylinder which the petrol appears to flow through about 9 inches long, it looks factory as there are some...