Search results

Now I'm not the sharpest knife in the draw when it comes to electrics, not even the basics. So here goes: I want to daisy chain some 5mm green leds and run it from 12v. However I'm not sure of where, how many, and what value resistors i need and if I need a fuse. Read on and see if I'm correct...

they are both loose, corroded,, they dont tighten up, and are probly the origional from when the car was born, so i thought id just re new them, the negative is fine because the cable that runs to it fits straight in the hole, and the same on the positive, but two cables goes to positive and its...

Im not sure if all freelander td4s are the same, but i need to renew the battery terminals as they look shot. The positive terminal have two cables running to it, one cable is a larger diameter than the other and cant find any new clamps to support this. Are they a landrover part only? if so...

Thanks for all the replies folks. Vissie...if you could do that would be great

thats good RED109 good price aswell

do you have a link mad hat man

Im in the process of changing my coolant hoses to green, vancuum hoses are done and a few other bits and bobs and wanted to change the wire conduit. The green silicone hoses were harder to come by than blue or red but i got them in the end from a company who were willing to custom design mine...

Is "wiring conduit" the correct name for the black flexi stuff the covers the wires in the engine bay? Im looking for green "conduit" that i want to replace the standard black with to match my silicone hoses but cant find any what so ever, searched everywhere. Have i got the name of it right...

i have to same problem but starting to think thats the drop links are not causing the knocking, ive replacement my anti roll bar bushes (had no need to fit the jubilee clips either side as my STOPS were all still there). Also the bottom thread of the dtop link didnt line up with the hole on the...

does anyone know what the best access is through the firewall from the engine bay to cabin. Its for my Amplifier im installing under the front seat and obviously need to wire it to the battery so i need a way in/out to the engine bay. Are there any grommets or is drilling the best option?

2000 TD4 Auto, love it, got knocking on front wheel, coolant in water (changed oil cooler) now fixed (hopefully) had to get new rear brakes, cant change thermostat cos its too much of a bugger to get to. central locking on both drivers side door dont work, sunroof knackered. BUT I STILL LOVE...

great stuff, i will follow this procedure as i am doing mine sunday, and was actually going to write up a how to with photos but seeing as you beat me to it with a better way than what i was gonna do then i guess i dont have to. nice one creeeg

yeh i agree. well i read somewhere that the freelander in 90% front wheel and 10% rear wheel when in 4x4 motion, maybe thats utter bull but it wouldnt suprise me as mine isnt that different in 2wd as it is 4wd. but again, it could be me lol

yes, ive had to remove the end plate and i have used straightned out paper clips to hold them back, by the time i did this fiddly job it was cold and dark so will continue tommorrow, at first i thought i buggered the whole thing and im hoping it will still be working. I was never ment to take...

thanks for the reply, im suprised you knew what i was talking about becuase looking back at my own writing i couldnt understand it lol. good reply aswell very helpful thank you. unfortunatly i didnt have the 4 little holes to poke someting into so i will have to find another way around it.

on removing the starter motor (or part of it) using the really long bolts, the componant that spins with the bushes/brushes has come out, and i cant seem to get it back in without pushing the bushes in but i cant push them in at the same time as puting the spinning thing in. I hpoep this makes...

no probs mate, i must admit without the prop theres not a great deal of difference, but i would like a whole new unit as soon as. doesnt seem right thst its a 4x4 with 2wd

whaaaaaa? i got this one: eBay - The UK's Online Marketplace

you can throw it this way if you dont want it, im after a new prop as i busted mine off road.

Yeh blank it. You can find the kit on ebay about 30 squid and apprantly works a treat. I'll be doung mine this weekend