Search results

I tend to use paddocks as I find their website better than craddocks however if it's something important or special I go to lr direct or blanchards not the cheapest but when you ring you speak to people who atcually know what there doing versus paddocks who has no idea what your talking about...

In terms of mpg is the defender better by way of it being lighter or is that lost in the lower transfer box? ?

Ah yes unfortunately I have quite a lot of experience with the disco 3 tdv 6 and I must admit I find it a hateful thing. Would be a brilliant tow motor tho ill give you that but the fuel bills would be hidious. Im veering between either tdi or td5 the latter of which I have very little first...

Evening I have a problem here not the worst problem I grant but here it is..... I'm looking for a new tow motor, it will tow day in and day out anywhere from 2 ton to 3.5 ton I have had a look at all the new jap 4x4s out there and the only thing that even registered was the isuzu dmax. However I...

I fitted a copy zenith 2 years ago and the build quality is rubbish and it had a flat spot of idle from new that I couldn't get rid of and it did about 14 mpg. Just fitted a new webber and done 180 miles and averaged 22 mpg which is a 109 ffr with a tilt so not the lightest or the most...

Nice truck, by the way thoses spring hangers arent the right ones, you need the thicker ones with a twin height.

Could be entirely wrong:confused: Dont 2.6 have electric SU pumps that kick in hen you turn the ignition on??

Sounds like a half shaft to me. If its a standard Rover Axle you dont need to remove the diff. regards

This a subject that really annoys me. Although i've been SE for a long while i still remember the tricks that garages play, not just the ones i worked for. A common one is wiper blades, a MOT is down to the discretion of the tester and even a slight smear on the glass can be a failure. Also...

Im very similar in my shins and forearms as i did Muay Thai for many years and part of training is conditioning parts of your body you hit other people with like shins elbows/forearms and fists and that has led to many injuries and burns because i just dont feel it untill its bad. was stood in...

On a Military chassis parabolics are tricky things to fit! But i woudnt worry about the clamp and in terms of leaning that is likely due to wear as the MOD springs are pretty much unbreakeable but were generally replaced with standard HD/109 springs or even 1 ton springs. If you want...

I have recently come across the ACR website and i see listed they sell a high flow silencer. My question is why would some one buy this high flow silencer when they could just cut the silencer out their current exhaust and weld in a straight bit of pipe? Would there be any effects in MPG or...

Come on look! Got excited then.

Ohhh yes its a great feeling.

Hi, i have a ffr 109 and have looked into this, the short answer is visit EMLRA they have a lot of people with mod specific knowledge. Long answer is that it can be done. IF you still have a H/D chassis then it will have 2 settings on the the front dumb irons and on the rear crossmembers, dont...

Bit controversial this but i personally would give a Zenith copy a try. I have on my FFR a Allmakes 36IV Copy which was abut £40 shipped and apart from a few poor quality brackets and clips has been spot on for about 6 months use. I didnt expect much but for 40 quid it has been a good buy.

Faded old Nato green and fresh Nato green.

Yep a battery cover with two pull down hooks like what you have on the bonnet. Well on mine any wa

IIRC there were quite a few tings wrong with that landy, it was a very late 2a but it had the radio gear fitment of a later vintage but not quite sure when. Bloody good program tho

I believe so Flat but i havent seen these for years nor the IR goggles. Nice 90 btw i read your thread on emlra.