Search results

Hi, There is chances that you will end with 2 puzzled non starting cars. With a keybarrel is sometimes possible to make a new key.

Hi, If you only need to change the bearings, 3 hours should be enought. A bad VCU can become hot, if it’s bad. Check the propshaft for cracked rubber first. If the rubber is cracked you will experience knoking sound when changing gears. There is 3 uv joints that you need to check and replace...

Hi Just to understand, the engine start on the button, run well then, it dies after a small trip ? Regards.

Hi TD4 has a timing chain, if there is any timing issue, you will be good for stripping down the whole engine. I will start by cheking fueling issue 1 When you buy the car, does the car had already a starting issue ? 2 When you turn the key does the belt is turning ? 3 Does the engine try to...

Hi, A fault reader can help you spot the issue. Regards

Hi, You a need a 2 din adaptater, and also a connector adaptater. You can find one on ebay. Since you have audio control on the steering wheel, take one connector adaptater that have the option.

Bolts will certainly break, you will need new bolts. It’s better to remove the full exhaust pipes as a whole. Parts are bolted and welded.

Hi, to replace the flexible part, you will need some cutting. So you need to remove the exhaust…

Hi You can use a fault reader, to get any fault code ( first erase all codes ). Testing the fuel leak back on the injectors can spot a clogged injector.

Brake switch ? Can give an intermittent warning light.

TD4 ? A common rail engine, no enought fuel presure, no start. Check any fuel leak, or cracked fuel hoses, air can go in. Injectors can be an issue, test the return flow. HP pump can leak from one of it’s cover. Also fuel rail sensor should have the updated loom. No fuel presure reading, no...

Hi, You can replace only 2 injectors, it’s better to put new injectors. If the 2 other injectors are still good, don’t replace them unless you put new ones. For recon injector, it’s better to go to a bosch shop …

For the MTF94, go to the main dealer, they should have it, it comes in 5 Litter. Also undo first the filler plug before the drain plug. For the rear diff, there is no drain plug, simply use a sringe to remove old oil and put new one in.

Hi, Only one new injector cost 300 £, you still need to add the labor.

How did you get the belt out, in the first place ? You should slack the tensionner the same way to remove it and to fit the belt. The bolt behind is certainly lose, so you need to tighten it.

13 mm for the nut behind.

Hi, 24 mm for the freelander td4, you need a very long and thin spanner to do the job.

If the door lock don’t unlock you need to change it. If you put a preowned one, it has certaintly fail like the previous one. Can you open the door ? If not you are good to remove the trim with a closed door.

Hi Put the right part, try to find a preowned or a new one. Personnaly I will not miss with that part.

Hi, At 10 years, the engine belt and auxiliary belt should be changed.