Search results

Got a knock when i change direction on my TD5, just a one off every time you change direction ? Any ideas peeps :)

Steve,cheers for that, i will be going down your method route,had it re-tracked last week and the tracking was OK originally as i said but the wheel is stilll not centred, so i will do it as you said. Mind you when it warms up a bit as i cannot get "The big red tractor" in the...

Was going to suggest injector loom but see that you have done that ? Let us know when you bottom it out ****er spending dosh and not getting sorted !

Not so true Andy mine has only done 80k,cars used on stop start journeys are more suceptible as the contacts arc every time you start it(EVENTUALLY LEADING TO HIGH RESISITANCE),mine when removed did not look too bad and a good clean up would have got them away. The repair kit from e-bay is...

You do not need to take the drag link off,take of the sump guard which is easy,top nut is a sod and it is a 15mm nut not a 13mm bolt like the bottom ones ! Starter motor solenoid repair kits are ten quid on e-bay and will fix it as i have just done mine, easy to do. Jim.

Cheers for that,did you clip one side then the other or go for both sides in one go ?

Steering wheel is on the **** and it is driving me nuts:( the tracking is OK and i do not want to shell out to get re-tracked,how do i get the airbag steering wheel off to re-centre it ? TD5 Millenium :D

Got a replacement from Paddock looks like original equipment,tugged at the old one and it came out,the new one looks as though it clips in but do not want to get rough with it as i may end up fooking it. Any tips on fitting, electric mirrors by the way !:D

Mate of mine does the dent removal for a living. as long as he can get behind the dent with tools he can fix it,absolutely straight panel again !

Not enough adjustment to suit me with the sticky on !

Previous owner has stuck a replacement on the original,what sort of a job is it to replace it with an original,had a quick look but nothing obvious ? cheers jim.

Dacre, who did your re-map,was it any good ? as someone posted, stick your faults on here someone usually has an answer,people were not being funny. To p.m someone means send them a private mail,Adz must be from this part of the woods and know a couple of things about discos,stick with it as...

Cheers for that Martin,exactly want i wanted to know,guess what i will be taking a look at tomorrow ! Do you know if the failing seals are available ? "Prevention better than cure"

What is the crack with this,what happens where does it occur,prevention ? Cheers Jim

If there are no green lanes handy you could always drive over the "van"

Dacre, Whereabouts in gods country are you ? not long had a disco myself and have not used anyone for repairs yet,Fultons is 10 mins away from and seem a friendly lot,some bills in the glovebox that the previous owner had Fultons do the work,they are certainly capable as there is loads of...

Is it on the same network,the phone in my other car is on Orange,bought a pay as you go contract and stuck the sim in and away you go. Jim

Whilst i had the top cover of the engine on my Disco 2 TD5 i noticed 2 preformed nylon pipes at the back of the O/Side engine, they near enough have a 180 degree bend in them where they finish they are not attached to anything and there is nothing obvious as to where they should be. Are they...

Cheers Andy. Confirmed 15 mm nut still a sod to get out ! Jim

Cheers Digeee, It is the furkin nut at the top that will not budge,anyone else had a go at this ? Jim.:confused: