Search results

were bouts you at

funny thing is you buy a part its ok somone comes along with a better part you buy that you end up with boat loads

o ps get yaself a good angle grinder aldi do a belter for twenty quid and some cutting discs you will need it to get everything loose then replace with stainless much better get yaself to a fasteners place dont buy of ebay buy in bulk

just look around there are always bits for sale i stock pile all my stuff if i see owt cheap i buy it ive got axels and allsorts laying around i bought a r380 defender gearbox no use for it at the min but handy to have for the 300 tdi chassis ive got,think ahead thats the key ebay free ads...

just thought i would chip in here i had a 200 tdi many moons ago and it was indestructible i abused the sh_t out of it never let me down only thing i had issue with was a starter motor paint to get at with lt77 gearbox but that was only bother i had in 4 years,got a 300 tdi now and a td5 no...

just realised i forgot to send you pictures of the way air filter was mounted onto the tdci bulkhead will sort that out getting too dark outside to do it now but will do it soon,ive had that mig for about twenty years and its still going strong it was that rusty i rubbed the front down and...

Got mig welding with co2 did you know you can turn an arc welder into a tig by reversing polarity and using a manual tig torch with a manual gas valve on it for forty quid off flea bay .was thinking about giving it a go and if you get yaself a co2 bottle you can take it to a fire extinguisher...

Yup on glow plug relay, my racks nearly done will stick a picture on here let you see it been doing loads of welding I was thinking my welding was crap till I seen a propper rack and it was rubbish compared to mine lol

lol

if you got the gear make one just make one same as one that britpart sell for 500 quid cost me 80 quid for pipe bender and 107 quid for gear to do it and if i dont say so myself its practically identical apart from ive added spot light mounts and some stronger brackets it will be rubbed down...

i will sort you a pic out sorry aint been on here for a while been building one of those 500 quid brit part roof racks for my double cab for a 100 quid lol price of the new steel tube and square tube will post pics of that too couldn't justify paying stupid money for one when i can make myself...

air filter is mounted on the bulkhead on the tdci ecu bracket i simply tac welded it onto the bracket and moved a pipe on the intake side the engine breather one,ref lights i use clear indicators and put led bulbs in them you bust have the standard bulb holders as pins are offset for indicators...

ive done leccy fan and put thermostat in top near water pump also made a float switch for the expansion tank gonna wire both into the leccy fan so if water level drops too much fan will run till i top it up i bought some propper led symbol lights for dash too off ebay make it look better,am...

ive got all 110 on 110 v5s etc i have one not registered yet still on army id thats gonna get blasted and galved and set aside for a build in the future,my first 110 is a 1989 bought it as it was totally mint proppa number etc no grind marks or dints in chassis as these idiots ringing them try...

its a build from scratch jobby so bits are hanging off all over the place just hadn't put a jubilee clip on it sorted now though,just need to find a good painter as i dont have a garage to do it myself even though i would like to.

well to be honest the way i drive if i hit anything i will be dead anyway lol lol ,the car is also getting fitted with full harness too so shouldn't really get tossed around too much basically same setup as the spectre one.

i could do with more room my dad has a backyard over 100 mtrs long and about 30 wide give or take but he wont let me put a big garage on it boo hoo so stuck in a little tiny garage with my gear and working outside in the cold,had issues with fuel lines other day leaking so i got some 8mm...

ref seat safety who cares when you got a boat load of cage around you and a modified strengthened winch bumper basically if i hit anything its dead and a full cage to protect me,i didnt know there was any kind of issue with seat safety you got me thinking now when i strip seat to install heaters...

ref seats i bought a set of copy ones for 350 i will have to look thru my ebay if your interested