Search results

Thanks all. If the rain stops I'll take it off :)

thanks for that bukko i'll give it a go as soon as.

Thanks for getting back. Can I leave the VCU in place or has that got to come off to?.

when you say take off prop shaft is that the front or back, or both. and is that the same as me, vibration starts after being on the motorway for about 3 miles or so. thanks for the reply.

hi, it is not coming up though the steering wheel but from what feels like the front end of the vehicle thanks for the reply.

hi guys, my landy has developed a problem. it is only noticeable on the motorway at 50mph and starts to fade once over 70mph. when i get on the motorway it does not start straight away but say after about 3 or so miles. the feeling i can only describe as it feels as though the road wheel is...

Cruise control?.

Sensor I think is on drivers side. The sensor is not directly behind the grill but more in between the fog light and grill.

Fitted a stainless steel egr bypass. Looks a lot neater now.

Wait for it! When the one member from the tratter boys club that can read see this and points the rest this way via a link. Then you will get the usual cut and paste replies :)

I got a sachet of grease with the kit with TRW on it but it was white. Whole kit was in a land rover box. I am thinking that the carrier hole has had it. I have looked at it twice now.

Thanks for the replies. Cleaned out the hole and put in the grease that came with the pins. The caliper slides freely once the pin is in then after a while it stiffens up again.

I need a new caliper carrier, as my drivers side brake squeals when slowly rolling. The guide pin in that brake does not slide any more. I got a new Oem guide pins set but when going to insert new pin it was tight. Passenger side was fine. So my question it when I site selling these things say...

They are 15"

That looks different than mine..

Fitted it's winter boots. Takes some getting use to the skinny looking wheels but they should be ok for winter and mud :)

Same here.

Bugger, I fitted a Mahle filter last year. Better keep an eye on it. Thanks for the heads up.

Fitted day light running lights and got some kingpin AT tyres on my spare set of alloys for the winter time. Plus brushed the back out after a trip to the tip.

Sounds like your MAF sensor is on its way out, unplug it and see if if runs better. If so you need a new one.