Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. freelandie71

    Brass neck, Freelander image theft

    There is a guys sell facelift nudge bars with a piccie of mine This is it.
  2. freelandie71

    So close.... Bit of assistance required.... Fog lights

    Ohhh I thought you where fitting both. I did not know the fog light ones wired up differently. Now I know. Glad I went for the spots I would not be comfortable tackling a fuse box bit.
  3. freelandie71

    So close.... Bit of assistance required.... Fog lights

    Oh you are installing the lights within the bumper. I'm with you now. Glad you got it sorted :)
  4. freelandie71

    So close.... Bit of assistance required.... Fog lights

    I don't recall having to touch the fuse board under the dash. I know the dash pod has to come off to splice a wire behind the clocks. What it the part number you have for your lights.
  5. freelandie71

    Spot light pods..... Facelift

    I fitted these. Not too much trouble. Except for trying to get the wire through the bulkhead rubber grommet. But once done that is it. Even the dash pod is easy and surprisingly neat and tidy behind the dash clocks.
  6. freelandie71

    HRW not working, advice plse

    What is a hrw?.
  7. freelandie71

    Heated front screen retrofit done!

    The switch part number is YUE500130PUY
  8. freelandie71

    Heated front screen retrofit done!

    From hay i have read you need three things. 1, the switch. You should have the wiring there fixed to the blank. It is the top right blank where the switch goes. 2, the wire harness ymq000990, and lastly the screen. Thanks it it really.
  9. freelandie71

    Heated front screen retrofit done!

    Thanks for the replies. I have seen this plug before and wondered what is was for. :)
  10. freelandie71

    Heated front screen retrofit done!

    I have been looking at doing this myself. But where is the switch loom plug you mention ?.
  11. freelandie71

    Heated Seat Switch

    I think you are going to need a relay and heat squib or what ever they are called. It you have wires coming out from the foam of the seat and have a little black box attached to the underside of the seat then a switch is all you need. But you can retro fit it all. I did.
  12. freelandie71

    Winter tyres...which ones do you have?

    I got a set of 15" alloys last year and put kingpin AT's on. A bit noisy but handled well. Going back on soon.
  13. freelandie71

    Oil leak

    I'll find out where it is coming from now I suppose
  14. freelandie71

    Boot net fixing hook things

    Thanks :)
  15. freelandie71

    Boot net fixing hook things

    Hi does anyone know the part number for the hook fixing (the circled bit) mine has snapped. Can't seem to find them anywhere. Although I have not yet tried the scrappy.
  16. freelandie71

    Oil leak

    It appears to have stopped leaking.
  17. freelandie71

    Oil leak

    Hi guys. This is a bit of a long shot but here is goes. I have an oil leak and I know it is not engine oil as it is a golden coloured oil and it is thinner than engine oil. So I was wondering what is the oil like In the gear box and ird box. I noticed it a few months ago when I took of the so...
  18. freelandie71

    what gadgets and gizmos have you installed?

    I have a spare light switch that came with the face lift light pod kit. I think is for use in another country. But I still have it if anyone wants it. I'll put up a piccies of it later today.
  19. freelandie71

    Santana landies

    The White one came back to the village.
  20. freelandie71

    Santana landies

    Second picture did not load for some reason.
Back
Top