Search results

Have you checked transfer box bearings.

Do it yourself easy to do

Panhard bushes

A 300tdi tear doff will fit in the front as they are the same. Ive got a 300tdi diff in my garage if your near to crewe

Youve got dodgy door connector then if lights stay on.if you open a 1 door at a time and press the switch then if light comes on its ok if it doesnt its that switch Also rear screen will be a new switch off ebay mate.

There was a guy selling a edc chip for the discovery auto with edc on ebay the other week

I wouldnt remove props just get underneath grab it with 2 hands and shake all ways you can if it uj itl move. Then do the same at all 4 joints 2 on each prop

Id clean the rad pipes and rad out. Or get a garage to test the coolant to see if head gasket has blown.

If there loose they may wind the nut off.or strip the thread

As tight as rmthwy will go

U tried panhard bushes.

How fid you stick them side rails to the door they look good

Pmd u

What wire have you cut in to for the power.as to bupass the immobiliser you need to cut 2 wires and send 1 to the pump and 1 to the relay

I had cut away the same nount and my mount was very seized had use alot of wd40 and knock up and down to get it moving. I refitted the mount to the bracket and tacked in place once spot on. Then temove and weld in place then fit and weld all in

Seperate the ally from the steel and youl get more as itl go thru as mixed so you may get 50 quid but more as ally and steel

In the back of ya motor then if no roof rack make some kind of slide in storage

Good stuff saved a few quid there then cheers mate. Are the polybushes better than the standard bushes look better and easier to fit

Had my mot on the disco yesterday it passed but rear trailing arms bushes are perished where meet the chassis. Ive got a full set of polybushes but there for a range rover classic. They look the same so is it ok to fit these to the disco or should a buy for the disco

Thats a standard pin by the looks of it. A boost pin doesnt look like this. It has a big groove cut out not tapered. Look on ebay for boost pins and see for yourself or youl be back on here saying theres no difference.