Search results

I hear what your saying, UGGHHH, i think you could be onto summit as the O/S/F sensor was replaced due to open circuit, it was a break in the wire that i found and just nipped it together and drove 20 yards the light extinguished then, and since then the only only thing i have done is replaced...

I have checked the resistance it is within range, the sensor that was replaced was a one removed from a scrapper and the Ecu was too, the previous Ecu failed at the first test self diagnosing as bollixed, this Ecu was fine the the scrapper all the components come of, trying to sort the ABS out i...

I am in the process of sorting the ABS out fairly simple, i have changed the ECU and 2 sensors and closed all air gaps and done all wheel bearings, the Abs light blinks when the ignition is turned on to say no faults (after i had cleared them) but the light refuses to extinguish until you reach...

i hit it with big hammer then worked it with a 22mm ring spanner lots of Wd40 it took an hour, clearly the diff lock and high low had never been used.

Is an Auto ?

Hi looking for a set of wheel adaptors to 18" Disco 2 wheels at a good price, as i have a set of disco 2 wheels and tyres lying around that are practically new its got to be cheaper to buy spacers than buy a new set of tyres for the old disco wheels.

Oh and by the way you may wonder why all the Hoo Har normally it wouldn't be i would have just slammed a it on it and cracked on but the engine is a ………….. EDC one so this should be fun :clap2:

Another design from someone a bit crude really

hi yes whoops got the tank wrong but you got the just, the extra filter would be on the WVO waste intake side after the heat exchanger then after the lift pump just before the injection pump, basically by passing the filter on the bulk head, this would massively reduce purge times but would...

Oh sorry forgot about the WVO bit, i will share a secret with the world ….. or not as i don't want to but anyone out of business who does it but i will tell you my way of processing WVO kit needed rain water bowser with lid your garden shed 5mm metal rods the cheapest J cloths you...

i am not using a twin tank on the disco yet, its just got a splash of WVO in the tank I have all the components to install from previous vehicles i have fitted kits to just finding out what people do or don't to make there installations as easy to live with as possible, In the past i have...

Any good ? of past experience i might move the veg oil pre filter to after the heat exchanger as when the oil is thicker it often restricts the flow,

Cleaned out the gutter run a smear of sika flex around the gutter (if you look at the old sealant in there its likely to be cracked) the using a moist finger on a cotton glove smeared the sealant in to a nice think finish :eek: err sound like 50 shades of grey :o then repaired the window rubbers...

i would put a bet on the crank seal, incorrectly seated, i wouldn't have changed it in the first place unless it was leaking seals are a thing best left alone unless its leaking and must be repaired or you are changing both faces as often in the case of crank seals the crank will actually get a...

Still searching, i would show you my drawings but its a bit Tomas aged 5 LOL, the guy in the vid has got the right idea but his canister filters are too expensive and big he should have used the basic plastic inline ones and he talks about crud blocking things up i have run veg oil for years and...

Nope the rear arches had only gone right at the top were the c post attaches and if there wasn't a rubber grommet there they would probably still be solid, to look at they were still fine but after chipping away at both of them they whole was around the size of your fist i have checked the lower...

if your disco isn't a hard core offroader it will look **** with our them on i have replaced and repaired the box section in the past i use sikaflex to stick them back on. As you say 80% of discovery corrosion could be avoided if A: they didn't put holes everywhere B: they didn't put rubber...

found this Land rover discovery 300tdi wvo bio vegetable oil conversio - YouTube

Hi, i have looked for days now an can't find any decent source of conversion, I am a veteran when it comes to this having run cars on this for 10 years mainly pugs, and a xantia that i done over 100,000 miles on waste veg oil and old engine oil and that never skipped a beat, service every 6k i...

Can it even be done ? the electric wires that go into the pump to active the electro magnetic clutch have been severed just behind the drive wheel and need replaced can this even be:confused: done ?