Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. andyfreelandy

    Stuck removing brake light switch

    There is room, honest !! Unplug connector and it rotates. Corners are cut off to make clearance for sensor.
  2. andyfreelandy

    Drinking Coolant / Head Gasket

    I'd say that what you can see and think are valve cut outs are the shadows or actual valves standing open looking like they overlap the bright ring. The bright ring could be the top piston ring if these are the actual valves rather than cut outs. The inlet manifold can allow water to be...
  3. andyfreelandy

    Drinking Coolant / Head Gasket

    Inlet manifold gasket can let water into engine too.
  4. andyfreelandy

    Drinking Coolant / Head Gasket

    There appears to be reflections but looks like your arrowed part of gasket to me. Is that looking up at head underside or block ??
  5. andyfreelandy

    Drinking Coolant / Head Gasket

    Looks like the shiny fire ring on the head gasket. Compression sounds OK if all similar.
  6. andyfreelandy

    Freelander 1 TD4 engine waveforms

    Bought one of these. https://www.ebay.co.uk/itm/365506841438?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=U9IdHnTiTmy&sssrc=4429486&ssuid=b5qQSb6hQNK&var=&widget_ver=artemis&media=COPY Took 10 days from China ! A 18 MHz digital storage scope for £35 !! My 2 man lift telequipment job has...
  7. andyfreelandy

    Older F1 EML? (SOLVED)

    Is that up to 2001 ?? In which case MOT man is wrong and no EML on pre 2001 petrol.
  8. andyfreelandy

    Thoughts on EGR removal

    You are missing nothing ! It is a simple way of effecting EGR removal and cost nowt... If a blank or a hollowed out EGR is fitted it improves the air flow. Whether it is noticeable is difficult to answer
  9. andyfreelandy

    Older F1 EML? (SOLVED)

    My 2003 1.8 Petrol has an EML. It has shown at times. Not with emission problems though and I am pretty sure it doesn't power on at key turning time. Lat time it showed it was a coil pack fault which is not fitted on early models.
  10. andyfreelandy

    Older F1 EML? (SOLVED)

    EML.doesn't light as a test when switched on. I will double check that !! But sure it doesn't. I can put Pscan on it for you when you pass through.
  11. andyfreelandy

    Freelander 1 All bolts etc Metric?

    Here's some. Never seen one, except my old brake pipe spanner !!
  12. andyfreelandy

    Freelander 1 All bolts etc Metric?

    The nuts on the front of the propshaft to IRD bolts are best fit for 1/2 inch AF. Also the TD4 aux belt tensioner is 15/16 inch AF. 24mm is loose and hurts your knuckles when it slips off !! Can you get 6 sided ring spanners ??
  13. andyfreelandy

    Freelander 1 TD4 Turbo rasping noise SOLVED

    Ever since I got my 2003 TD4 Sport, the turbo lets out a growl or a rasping noise when it is working, say when the car changes down on a hill and the turbo comes in again. At 53k miles, I didn't think it was a turbo bearing, now at 68k it has got neither worse nor better!! Figured if it was a...
  14. andyfreelandy

    Freelander 1 Glow plug forced activation

    And leaves them on for a while after starting too. Stick a voltmeter on one..it is interesting.
  15. andyfreelandy

    Freelander 1 Andyfreelandy's get together, North Devon, September 13th

    Can do whatever date people want. Be good if weather was fine. Do you go on holiday for the entire school holidays?
  16. andyfreelandy

    Freelander 1 Andyfreelandy's get together, North Devon, September 13th

    There is summat to increase the county division !! I know, let's go pasties 🫡
  17. andyfreelandy

    Freelander 1 Andyfreelandy's get together, North Devon, September 13th

    Got 3 phase, should get him home again 🫢
  18. andyfreelandy

    Freelander 1 Andyfreelandy's get together, North Devon, September 13th

    Been thinking..... If I proposed Saturday 26th July, could folks let me know how many people might be interested?? Long distancers could pitch a tent overnight. Could organise a port a loo and refreshments. All depends on the interest. It would be a park up, chat, exchange ideas, social...
  19. andyfreelandy

    Freelander 1 Say hello to new friend ! TD4 needs new engine.

    Thanks for all the info. As above, oil in bores puts compression back to where it should be so worn bores or broken and worn rings I guess. Today, loosened off all the bits to come off ready. Drained all fluids, removed everything that I could to still keep it movable and drove it out of the...
  20. andyfreelandy

    Freelander 1 Andyfreelandy's get together, North Devon, September 13th

    Happy to donate use of a field if North Devon suits anyone. Date by agreement !! About 25 mins from M5 JCN 27. As it's a field you'd need a 4x4 🤭
Back
Top