Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. brianp38dse

    P38 new problem with abs and traction fault

    Was the brake light switch set correctly when it was fitted, then are not just a one in one out job.
  2. brianp38dse

    Ulez compliant just

    It would involve an engine and management swap and a whole lot more that is if it is even possible, it would need adblue tank and far more cost than getting one that is compliant, other option is to go for a petrol one and spend the money you would have spent for the conversion on fuel :vb-biggrin:
  3. brianp38dse

    P38A P38 2.5 diesel viscous fan rivets.

    That may work but they are in to alloy so may be a bit corroded if the fan works ok when tested leave well alone.
  4. brianp38dse

    P38A P38 2.5 diesel viscous fan rivets.

    They are shear bolts designed for the nut part to come off when its tight you can undo the with a few tools
  5. brianp38dse

    EP80w-90 in a P38 Auto box

    If you have to work on gravel put a sheet of 12mm ply down makes it a lot easier to move the jack about and slide yourself about on, i even use a sheet of hard board on block paving as things move so much better and it catches any oil and gunk.
  6. brianp38dse

    Range rover p38 2.5

    They are on fleebay there is a used one for £19 or new going up to £70
  7. brianp38dse

    Range rover p38 2.5

    If its attached to the fuel filter housing its the MAP sensor about £40 new
  8. brianp38dse

    Driver door won’t open

    https://www.ebay.co.uk/itm/387633631141?_skw=liqui+moly+1538+rubber+treatment+500ml&epid=7029619724&itmmeta=01JHD2HG0NNR1R6HWEA8KEXAQF&hash=item5a40c3cfa5:g:DlkAAOSwIbVnPd6I&itmprp=enc%3AAQAJAAABAHoV3kP08IDx%2BKZ9MfhVJKmchk3Q8swGLHbn3hgMU7u6FCrOpZisuKBmBD4ncOdxxi9twaPzIL8J4UmlqLc3CteWgGOiMJLEyoR9...
  9. brianp38dse

    EP80w-90 in a P38 Auto box

    Try this thread for the download https://www.landyzone.co.uk/land-rover/rave-and-microcat-downloads-plus-other-useful-info-on-range-rovers.322195/
  10. brianp38dse

    my project

    looks good as it is :) just give it an oily rag restoration.
  11. brianp38dse

    L322 4.4tdv8 change oil cooler

    And the waste joints with stand allsorts of chemicals and ****e pored down them
  12. brianp38dse

    P38A Wabco C or D, ecu.

    About £15 if your lucky :vb-biggrin:
  13. brianp38dse

    P38A Wabco C or D, ecu.

    That ecu will be wabco b
  14. brianp38dse

    P38A EAS problems P38 1999 DHSE

    This is the thread you want https://www.landyzone.co.uk/land-rover/checking-eas-compressor-and-diaphragm-valve.172555/
  15. brianp38dse

    Introducing myself - this might be the second time?

    Tiss what auto correct dided :(
  16. brianp38dse

    New Member P38, For My Sins...

    Hello and welcome :) any questions ask over in this section of the forum https://www.landyzone.co.uk/forum/range-rover.10/
  17. brianp38dse

    Introduction,

    Hello and welcome :) tiss a big log burner if they fit:vb-biggrin:
  18. brianp38dse

    Landy V8 Defender

    Hello and welcome to the mad house :vb-biggrin: :) sounds like a cracking deal
  19. brianp38dse

    JAFAD, Newbie

    Hello and welcome :)
  20. brianp38dse

    Introduction.

    Hello and welcome :) i would be thinking brake fluid as well
Back
Top