Search results

hi has it dropped to the bump stops?? i had this problem went through all the air bags compressor etc it ended up being a corroded wire which snapped in my hand the rear would stay up may be two days may be 2 mins was a bad connection were it had corroded through.. were the height adjusters are...

UPDATE so far i have had it back to land specialist they have had it from cold now when it misfires and have said cylinder no.4 is high As far as i can gather the rest are between -8 and +8 and no. 4 when cold or up to 2000 revs is at +17 now when it gets warm or you go past 2000 revs it drops...

i know that if it rains really hard or wash the car it can come in through the heater air intake (plenim) passenger side and runs down through the heater fan. if i park my car in backwards which means passenger side is down in that corner due to the angle of my drive if ****es in if it rains...

hi i had it back to the landy specialist today MAF sensor made no difference, have swapped MAP sensor for a known good one still no difference, landy guys are going to have it in next week, how ever they did mention something about something sticking under the camshaft cover so it could be...

hello td5 i have the same probe starts first time every time stutters like made when revving freely up to 2000 but does get better when warm but still there don't really notice it when driving. i have had mine on diagnostics nothing i have changed MAF sensor and manifold (MAP) sensor, have had...

any suggestion on the above thread please help im at a loss for ideas now!!!!!

i was thinking that T1G up but i was thinking am i going to be opening up a bigger can of worms trying to get the manifold off with those bolts..

hi all, 2000 td5 disco 2 is still misfiring between 1500 and 2500 revs only when cold have noticed it when disco is stationary in park and just revving the engine. so far i have had it on a diagnostics and no faults found (how ever just a normally garage diagnostics not full landy one). I have...

thanks for the replies, batternberg yeah i will be ditching it just didn't really want to take the pipe off at the moment as its still on there with one bolt, was hoping to be able to drill the bottom one with it in situe so if i cant get it out least its still on there.....

all i can say is be gentle slowly back and fourth... donna how im going to drill mine out yet....

hi got a td5 soaked the bolts on the exhaust manifold for a week!!!! spent and hour back and forth and the bugger still snaps!!!!aaaaahhhhh nightmare..... just wondered if any one knows how i could get a drill in there to drill it out??? its the lower bolt, and the flex pipe is still there as i...

if you down load the link that sierrafery gave me at the begging of this thread should be able to fire up the rave straight away worked fine for me...

excellant i will try all this over the next couple of days and let you know the out come many thanks for your help..

i still have the erg i was thinking of getting rid of it but i will try that first. will that be the small pipe going into the top of the whole unit??? does getting rid of the erg make that much difference?? will it effect the mot with emissions??

wow is there anything you don't know!!! thanks for your link earlier for the rave download i messed about for an hour or two trying to sort it downloaded your link worked straight away!!!!!!!!! ok i have removed and cleaned it but as far as if its working correctly i don't know, so by the sounds...

i have checked everything i know off red plug ecru ok, disconnected maf no change, removed and cleaned map no change, have disconnected waste gate rod waste gate moves freely, only seems very notable when cold but starts overtime on the button don't know what else i can check... the only other...

i'v got a discovery 2 is there ecm wiring under the drivers seat??? i've checked the ecu by the battery theres no oil present changed the injector harness a few months ago

that is true i don't look inside normally only work on the outside but i need too want too learn more about these engines!!! but as for starting mine starts first time overtime on the button no matter what the weather. just misfires between 1000 and 2500 revs when cold gets better when warm.. it...

update thanks for all your help people i went to the web site sierrafery said and downloaded the link he left and it opened up straight away in that application thanks again. i don't know why it wouldn't open in the over application i think i did it more luck then anything thank you for all your...

yeah i got rid of it it shows version 4 in the disco 2 folder.. thats it