Search results

I,d just like to thank every one for there help with this looks like I slipped a boob with the glowplugs will replace asap looks like I'm going to be a bloody dab hand at changing these by the time I've finished Thank once again

Hi Datatek I've got 12.95V at the battery would there be a drop like that between the battery and the glow plugs ?

Hi Dopey I fitted the britpart STC3103 seemed to be the one dealers around here said to go for

Hi Jerry Turns over nicely but doesn't seem to quite catch when started runs smoothly on all six cylinders straight away

Hi Wammers Put voltmeter on plugs running at about 10volts when light is lit what should it be ?

Bought the ones recommended by local Landrover dealer

I've got a P38 just fitted new glow plugs now if I heat it once its a lousy started but if I heat it twice works fine so can some one please give me a clue as to why this happens Thanks

I got a P38 when I turn the engine off the radio goes off as you would expect but then about an hour late the radio comes back on by its self no key in the ignition nothing can someone tell why please co,s its driving me F***ing nuts

Hi Perdix Have you managed to scrounge a CB as yet if not got one here you can have just need to check make sure it works PM me your address and we'll see what we can sort

Thanks for your help guys Much Appreciated

Hi Troops The plastic front grill on my P38 is very faded to a very pale green colour would like to restore to either green or black can any body tell me what to use not sure if paint would work I think it could just flake off Thanks

Had a lot hassle with EAS spent a bloody fortune still didn't cure problem every time I towed the caravan it went up to off road and wouldn't come down so I Put a spring kit on mine best move I ever made

Thanks for your help guys all back together been off the road 18months MOT tomorrow find out whats wrong fingers crossed nothing to expensive

1999 V Reg 2.5DSE 171850

If any one on the forum comes across the same problems I have trying to aquire on of these plastic bushes please contact me as I have started making them either out of plastic, aluminium, or brass i'm also producing the gear selector pin out of stainless steel

Thank You all I suppose its silly to ask where I will find the rear footwell bulb to plug it into and please don't say the rear footwell I may come from norfolk but I narrowed it down to that far all by myself

Hi Troops Can anybody tell me where I will find a wiring diagram for a 1999 p38 I am in the process of refitting the cubby box and electric window switches and have come across a small white plug with two wires one wire is white & Purple the other is Blue & purple but I dont seem to be able to...

For sale Series 3 Cav Injector pump and ac lift pump removed from a serie 3 approx 4 years ago the vehicle was in good working order when removed Open to sensible offers For more details ring 01692671793 or PM me

Have you tried the method thats in the handbook if not I will email it to you tomorrow but you will need the key code cheers

I'm trying to repair the gearbox on my P38 its a manual box and the plastic bush that activates the reversing light push switch is broke off the gear selector shaft can anybody tell me where these are available with out paying £600 for the whole to unit Thanks