Search results

Last error won't let go! 5E13 CAN Engine Signal error (This is read on the ABS menu on the hawkeye/TB4) Now I've replaced the complete ABS unit, and the error is still present. This must come from somewhere else. Does any one have an idea???

Well, It's fitted in the car... And was working fine until my welding story and the brake pads exchange without opening the bleeders...

Ok, a little update. I read on another forum covering Mini/BMW, I read that the 5DB0 was related to left rear wheel, and... miscalculating speed... A-ha... I removed the ABS sensor, and looked into the deep. What did I see? Well -as a good handcrafter, I used a lot of the white grease when...

Please excuse my lack of knowledge on Discovery... Discovery ABS by-pass what is this? And an update: Graduated electrician in 1987... I swapped the ABS connections on the rear end of the vehicle. And guess what! Now the RIGHT SENSOR has an electrical fault! (This is still the LEFT...

I forgot to mention: All wheel sensors report the correct speed when driveing. I've checked it wit hawkeye... So I believe the rings are ok.

Hi all, I'm working an a 2001 1,8K4 and are experiencing some issues that might have a connection: Error 1 5E13 CAN Engine Signal error (This is read on the ABS menu on the hawkeye) Error 2 5DB0 Rear left Sensor (ABS) electrical fault (I have replaced the ABS sensor 2 times, and now...

This was cool. How do I attend to this map?

I've seen that on the Hawkeye, but I've seen several different models of ABS units on eBay. That's the reason I'm wondering.

It's just that hist error is constant. It won't disappear whatsoewer... FRUSTRATED. And I have a ABS that's a bit odd compared to what I see other 2001's have... This is MY ABS: And this is what "other's" have: Does anybody know if these are interchangeable?

Might be some timeout then?

I have CAN Engine signal error. Strange. I have a car that I have fixed the bad fastening for the rear sub frame. The right front fixing that always break. On this car (also a 2001 18K4) I just discovered the same error. The result is that HDC error lamp lights up...

Just an update for the off topic ABS: I followed the line, and also looket in RAVE in stead of Haynes as I did at first. The cable is ok, and when I had a measuring at the correct points on the multiplug, the measurements was ok. I also have a CAN Bus error on the ABS so I assume something's...

Hi, The ABS sensor are replaced 2 times now. It measures 1120ohm (I'm an electrician), but if I measure the other end of the signal cable from the LHR ABS sensor, the resistance is only 128ohm... I've started to remove the front seats to discover and examine the cable, but maybe it's less...

Yup, so the next I found now, is ABS sensor Left Rear electrical fault. ABS is ok, 1120ohm but when I check at the ABS unit, its 128ohm... New cable? Or is this related to the issue that the only door that opens when I engage the central locking is the drivers door? The other doors clicks...

Case solved for me too. Haavard Guttormsen drove 100km's to come and help me with an old T4 steam powered computer. Just as for Hippo, The ECU and Immo was out of sync. Now the lady start as a dream. Thanks for your kind feed back and help.

Hi, Mine is a 2001 1,8litre I can't use EMS2000, only MEMS3 and there I don't have those readings that you refer to. I hope a LR fellow are showing up with a T4 tomorrow...

Just looked at the Lynx manual. It's almost a blueprint from what I read in the hawkeye manual. But there are nothing about synchronise ECU in the Lynx manual. Also it looka as it's locket to ONE VIN??? Just as the BlackBox... I've found something in China. a T4 diagnostics. US$ 2840 was the...

Hi, I don't get an error code at all. And for the security of the vehicle, I don't worry at all. What kind of idiot will steel something like this? I've rebuilt 4 Freelanders now, and 8 engines + a unnumbered amount of repairs for other people's Freelanders. Somewhere I could read that it...

Interresting. I'm usually active at the Norwegian Land Rover forum. Yesterday 18th of August, I had a customer coming to inspect (and possibly buy) my 4th rebuilt Freelander (2001MY). It's so nice New polished, new engine and.. Ok To the point: One hour before our appointment, I realized that...

Interresting what you're telling regarding the bleeding. You're talking about the bleed nipple on each callipper? I didn't know that was an issue... I hope that I haven't killed the ABS modulator... After replacing the Cam position sensor I'll hope the error code for the CAN disappears as...