Search results

UPDATE: Hi, A buddy with the same disco2 came over in the weekend to do some testing, this is what we learned ;). The kangarooing is no more after we bypassed the wastgate regulator, so i'm leaving that bypassed for now (might get a new regulator at some point). Checked all the turbo hoses and...

Thanks for looking at this data! Much appreciated! At the start of this recording the engine wasn't cold (dont know if that matters) and it was about 3°C outside temp. So i'm ordering 2 of these https://rimmerbros.com/Item--i-ERR2081 , 1 for coolant and 1 for fuel just to be sure ( not...

Ok, PDF uploaded. Hope its readable :) . Would be great if some eyes over here can look at it and give some feedback, if i need a new sensor in your opinion i'll just order stuff today but dont wanna spend to much on unnessecary stuff (allready been doin that before i had a nanocom i think)...

Hey, I have an excel with some data of the run i did yesterday.. Dont seem to be able to upload it in a post. Might be interesting tho to compare with the one i'll have when i changed some sensors.. or maybe the values are good after all after looking at them. I don't really know how they all...

Ok, will order some stuff and see what it does.. But that will only help with the kangarooing? OR do these also might have somehting to do with unbalance in the cylinders?

Oke, I just went for a drive and i unscrewed the oil fill cap when idling. It didn't move quite as in the video you showed.. Also came some 'smoke' out upon opening.. could be due to cold weather or that i drove for 2 or 3 kms before i opened it.. Also noticed that without the MAF the...

Trying to figure out some engine issues

Oh ok, I understand now end know wich part you are talking about. I'm gonna bite the bullet and order the AAP you proposed and a Genuine DCV. While at it i'll also get a new genuine water temp sensor and a genuine injector loom. Just to eliminate any faulthy things in the OEM part. Gonna hurt...

Wow oke, i don't really understand what you are talking about here xD . Blow by thing and DCV? I own this disco since April this year and have zero prior experience working on cars :oops:. Thx

Yes there was a little and i've been cleaning it every time I do something on the car. Last weekend there was a very little shine in the plug so cleaned it out again. The plug on the rocker cover is still very clean. I'll keep a close I on that one as well and will get myself a genuine loom to...

Oh ok, I'll try to do another test run this evening and check the readings with the MAF unplugged en de AAP plugged in. Ordering the AAP on the website you gave. thanks!

Hey, No, decat with straight midpipe.

Hey, Oke, no funds at the moment to replace the loom and MAF with genuine. The air flow reading is pretty decent i think, its 628 at 1.14 bar boost and 3900rpm. I allready have some 'forte' injector cleaner stuff in the tank, was told that that is also good stuff.. havent been able to empty...

Hi Thanks for you reply! (i've read many helpfull things from you on the forum allready :D. I'll order a new AAP sensor this week, what is the best to go? They are not cheap and the only one i can find really is a Britpart one (wich i heard are not the best parts). The MAF is changed with this...

Hi thanks for the reply! The plan is to change the AAP indeed, the MAF was changed recently to this one https://www.jgs4x4.co.uk/defender-discovery-2-td5-maf-air-flow-mass-sensor-siemens-vdo-oem/ Air filter was still bone dry, changed to a pipercross one as well this weekend to be sure its good...

Hi everybody, I've tried to read every post that has a related issue to mine but still haven't fount my answer. My problem is the following: My 04 Disco2 TD5 is rough idling especially with the engine cold! (235k kms, if more info on the disco required just ask please :) ) It started end...

UPDATE! All is in perfect working order again! Realigned the XYZ switch the correct way! putting it in neutral and lining up de hole (ment for special tool) with the flat sides of the bolt (? if that makes sense :p ). Doing it alone takes crawling under the car and in the car a few times but...

Hi Guys! First of all, thanks for the replies ;). Yesterday when i came home, first thing i did was get in the disco, and started playing around with the shifter. I had the XYZ off cause i thought that was the problem with the MS lights, wich it wasnt. I thought i alligned it good cause the...

Hi All, I can't start my D2 anymore :-D .. Let me give you all some history before ;). I bought the disco approx 3 months ago and has 233k kms. After a couple weeks i had the M+S lights flashing and went into limp mode for a second.. it went away so i didn't really give it anymore thought. 2...

Hi, I'm Laurens, 29 living in Belgium. I recently got my first Land Rover and i love it but sometimes hate it :p. It's been great fun on the few drives i could take cause i'm having some issues at the moment but i'll start those of in the proper place on the forum! Talk to you all later!