Search results

When measuring from the doorhinge to the upright door edge where upper (side with windows) and tub joins, the lip I get 30 3/4 on passenger side and 30 1/2" on drivers side. Guess its within some sort of factory tolerance! Its a 97 and original tub, bulkhead and chassis

Ok Will get my coat and measurement tape and measure our 110

Here it is: And more in this video series 1 to 4:

The youtuber Britanica Restaurations did a good video on this a year ago'ish. How he aligns the bulkhead, doors and tub during a rebuild. Will see if can find the video now

If enough room around the nut then use a Irwin nut remover socket. They come in sets of must used sizes. Used it to successfully on a rounded off caliper bolt. Good set for rusty landys

Wera Joker spanners looks very similar. Havn't tried them myself, they sell them in Toolstation and Screwfix

Quality feels good and its comfortably on long drives. Only recommodation is it replace the bolts holding the wheel onto the boss as original ones are abit soft if doing them abit too tight with a allen key. Think its M5x20mm you better measure to be sure Mine a 97 and bought 48 spline part nr...

Had same issue after installing Honda seats in my Def110. Main importance when choosing aftermarket steering wheel is to go for a slimline boss as the ones sold by most is positioning wheel too far from stalks. I bought a RDX steering wheel and slimline boss from boltonbits 5 years ago and its...

Soon 5 years on a 235/85r16 set of Discoverer AT3. 30K miles and sidewalls are ok thou I don't like the way they are "fraying". Quiet tire indeed, 1 flat tyre in 5 years due to a screw. Next tyre list is long.. Bfg for highest ratings/robustness, GG AT2 very similar better £. Both guess more...

Would say waste of money. From describtion and photos looks just like a filter with more "flow" Got a 300tdi with fullsize intercooler and boostring and pin and when changing from standard filter to a terrafirma high performance foam filter there was no difference.. So guess same with a 200tdi...

Found both, let know if need them

Removed them from both sides of our 110 300tdi to use wheelarch space for fuel(bench seats removed aswell) Put them in the possibly usefull metal bits place where they been gathering dust.. Anyone interested and whats the sale price?

Aye long drive from north east. Where the seagulls rule the streets. Had to remove the roofrack as bird got stuck under it when it took off late from the road. Mighty fast 300tdi

Around 145K miles. Guess 1st hg change as seller in Balloch didn't mention they did it and no service papers prior. Came from N Ireland. It was in good cond when inspected it and handed over the cash. Gaffa tape keps us try when we drove it home. Replaced most parts since, incl had to buy a mig...

Hopefully you'll be as lucky as we were when the headgasket went few years ago. I wasn't sure sure what the faf faf faf sounds was, thought exhaust and drove it gently for a week before booking it into garage. They said hg leak near bulkhead and good news that head was fully good and just needed...

Thats quick indeed! Now get the coolant sensor cap with added RR classic flavour to the mix and you got a working system. I fitted my homemade box behind the dash for less wires in engine room. Depends on where you easiest can get a +12v from ignition and how handy running wires:-) Thanks we...

Cheers for the word Agglomerator as comes up with reasonably priced filters with the clear bowl as you say. Now need to find a suitable one for fitting a watersensor too, and finding the water sensor. Googling continues Good tip on keeping fuel cap on, guess thats why petrol stations have a...

Dodgy fuel seems to be the subject at the moment. Never experienced it in UK SA 4x4 magazine had an article about it in most recent magazine mentioning Racor filters Youtube channel "4WD action" made a video about it few days ago. Thou feels more like a commercial and its very expensive for...

It works well, found a guide online 2 years ago and bought the component and the PRC7925. Connected it up and it works. If coolant level gets abit low and on heavy breaking the diode/buzzer in dashboard activates. So good indicator topup is needed. Guess the kit you bought is same. If you have...

Thanks for the offer for a fuel sediment filter. Is it same as standard fitted? Do you have a part nr? Main thing I want to achieve is to know in the cabin via visual indicator when to let the water out of the fuel filter. Got the coolant tank lid from think a RR classic and wired upto a green...