Search results

on the backs there is a bracket at the rear that I need to get the corresponding bracket to fit into the cappings, then at the front there is just a tongue that locates under the cappings. As far as I can tell that are too long to fold up, the bottom would clash with the seat back on the second...

How do you attach the bench here?

I bought gauges for the MUD console but instead have put a quad lock fitting in the middle at the top and fit my iPhone for sat nav. The head lining was recovered with stretch interior carpet, the LED around the edge are wired into the dash switch as an interior light.

Just an update, everything going well. Fitted Hong Kong double din stereo, reversing camera, MUD console and recovered headlining. Still got a long list of jobs to do, all interior trimming.

Can someone with 3 man bench seats in the rear show me a photo of you foward lower mounting? Mine seems to come over the second row bracket but there is a difference in height??? Cheers.

Has anyone replaced their auto shifter cable? I have found a write up but it says the shifter end star retainer and plastic retainer are tricky to remove and replace. Any tips?

I wish, just took a few photos. Also say a lot of Tdi Disco that the warm dry climate had been kind to.

found in Sitges near Barcelona.

The kit was working but I didn't want electronics in my 110 Auto

I know if that site but it is the clip at the other end. Thanks.

If you are going to swop injectors around don't forget to buy seals because you will need a new one each time. I was hoping to get £100 for the four injectors and pump.

Can anyone help me with a number for the clip in the picture or does anyone have a spare?

It will be electronic controlled furling. This can all be ditched if needed.

I have an EDC pump, pipes and injectors that I removed from my 1998 D1 Auto. This was all working when removed if you are interested.

PM sent.

Would you post these?

Thanks.

I am cutting the very rear part of my headlining (over door) to take a pair of speakers. I should have cut the holes before I recovered the piece but I don't have that option now. What is best to cut the fibre board headlining material? Holesaw, jigsaw?

Used as mobile tool/parts store while building 110 Auto. Rough and ready with free dents and rust. MOT till 21st Aug £300

Thinking oil pressure, turbo boost, Rev counter.