Search results

Update, went out and released the tension on the auxiliary belt (alternator), and the noise goes away (aux belt starts slipping), so it is not the engine itself but something that is connected through the auxiliary belt

Ok, Got the P38 2.5 DT (203k miles R reg) so far it has run as expected (slowly doing approx. 700 motorway miles a week) since I got it, it has been difficult to start, I went out the other morning and it was turning over but refusing to start (getting just about there but not quite) and ran the...

Ok, had a look throught the posts but can't find an answer, so here is the question I have the LPG currently set up in parallel with a T piece to both the feed and return, what I am looking to find out is if I can change this to serial where the feed is taken from the pipe from the engine and...

And that will actually be a PU-9836A (PRC 7618), I really should take note of what I buy!

Ok bought a PU-9837A off of fleabay, I knew that the display wasn't working, I can see that the LED's are not working (the display is back lit by 2 LED's), but before I spend a fortune sending away for 'repair' I thought I would replace them myself (I am not totally useless contrary to my wife's...

Sorry, 1996 p38a 4.6 HSE

Ok fanbelt burst today (no option but to drive it home) will get new fan belt tomorrow, the question I have is that it was noted that between the Power steering pump and the AC pump the AC pump actually looks as if it is 'stepped back' by 2-3 mm as the belt is not straight but going back at an...

Just what I was looking for as I need to do my roof lining as well, so I will watch with interest, and will be ordering from your supplier(s) a soon as I can see what's involved.

My evac shows the dreaded book symbol but not immediately on starting usually after a couple of minutes, I get cool air (not cold and not warm more a 'hint of heat') to screen and upper vents and only ever get cold air from lower vents (even if I put the temp to Hi on both sides), I believe that...

Oh! forgot to add it keeps telling me that the front Offside/main beam bulb has failed when it is clear that it isn't, driving up to and back from Aberdeen on Sunday night.

Ok all I am looking for some help bought the P38 and drove it from Birmingham to Livingston then Livingston to Aberdeen and back the car runs well, however there are a few electrical gremlins that i am looking for advice on which are listed below Central locking doesn't work, at all, it...

Here you go, make sure you pick the right one The Green Oval - Downloads | Land Rover Data CFN Hugh

Sorry should have said, it's a 1991 Discovery 1, and it was bought privately (sold/bought as seen) I don't really have a problem driving at 56 mph, which is the speed that I can achieve before things start happening, I am going to change the spark plugs and the dizzy (a name I have picked up...

HI Just bought my discovery 3.5i V8 last night, driving home if I go over 2500 revs it starts hunting/missing the faster I go the worse it gets nuff to say if I hit nearly 3000 revs its is undrivable, however driving at 2500 or under it is perfect, has had a professional conversion to gas, does...

HI, just bought my first Discovery, although I have had various Rovers before ranging from the P5B to the SD1 car, and various Classic Range Rovers, just thought I would try out the 3.5 V8 Discovery as a change. Now I just need to get in and have all the problems sort (it is a 1991 with 182000...