Search results

I’ll check that out, it’s not the compressor switching on and off though, that stays running and air vents out through the exhaust on the valve block.

Not been on here for a while as everything has been working ok. I’m having an issue with the exhaust on the valve block venting when the compressor is running, it’s not constant it’s almost as if something is switching it on and off every few seconds. I have replaced the diaphragm and the...

Another update and good news this time, after cleaning all the terminals for what felt like the millionth time I noticed that one of the pins in the valve block to loom plug was loose,so when I plugged it in it was just moving back in the plug and not connecting. A bit of poking round in the...

Will check that tonight, cheers.

The diver pack is brand new and I also have tried a known second hand one from Kurt off this forum and with either fitted the fault stays the same. I've had an offer to loan an ECU but don't want to waste anyone's time and effort in posting etc. if its not the issue.. Pressure switch tested...

Thanks for al the reply's, I'm slowly working through all the advice starting with ensuring that all connections are clean and tight fitting (Rain is stopping play at the moment as well as having to go to work), Ill try and answer some of the questions below. Yes new compressor which still...

As far as I can see they are all pretty tight connections, I'll give them all a check and see what I can find. It's quite difficult to get anything in there without bending pins. Cheers

Sorry yes all connections have been cleaned in the eas box and ecu.....

UPDATE. Sorry for lack of posts but been busy recently, I'll list everything below that I've the car tried and the results I've had from the beginning to save people from reading from the first post. Car purchased with springs fitted. New airbags fitted, airlines repaired, compressor and valve...

Fingers crossed.....

I give in, the white connectors behind the kick panel were corroded so they've been chopped out and soldered, new driver pack has been fitted and the compressor still just won't run properly. (Also no faults on EAS unlock software). The compressor just jolts and won't run unless I bypass the...

Getting there, few more bits to try when I get a chance.

That's what I thought.

I'm determined to get this thing back on air, like you say second ones are out there but I think Ill go for a new one. Might see if I can lend one off someone first. Thanks again for all the help, I'll let you know how I get on.

Here's the latest update, some days the EAS works absolutely fine and has no issues whatsoever and then the next day it throws a complete wobbler and lift it up, puts it down or just plain doesn't move at all and puts the 35 mph message up. It's entertaining if nothing else, I suspect the...

Its a new pump as the old one was past its best to say the least, plugs are all clean but I will check again. I have the EAS unlock software and it's not showing any faults (first time that's happened)

I've finally got an update, it's now up on its suspension and stayed up overnight with the delay relay removed. When I switch the ignition on (replaced relay before this) now the compressor sometimes just kind of stutters for a second and stops and the stutters again, like the start signal is...

Is this still available? Mine decided to destroy itself tonight. Thanks Paul

Sorry I didn't explain that very well, I started the car to lift the suspension up ready to turn the ignition off and remove the relay to carry out the test but never got that far as the compressor gave up. Its the electrical end that's packed in, I've only had a quick look but it looks like...

I think this car is trying to drive me mad, I've just started it up test it by removing the timer relay and the compressor just destroyed itself.............Off to look or bits to repair the motor end or buy a complete new one.