Search results

Hi does anybody know how the clip retaining pin for the handle attaches to stop the handle being pulled away from the the body everything else is tight and the handle still pulls out on the handle part number diagrams it show a clip retaing pin labeled number 5 in picture that seems to attach to...

Thanks for replies just phoned John craddock and they are like everyone else show it on the website but can't source it and don't have any in stock suppose I'll just have to do a bodge job on it then but thanks for trying

Hi Just a quick ask really !! Does anybody know where I can get the front sidelight bulb holder for the p38 ? I have tried all the usual places online but it says it is obsolete just thought you guys might have a better idea Tried sorting a bad connection found it was corroded and one of the...

Hi No I have gone under the car now found the front uj was about to disappear into a catastrophic mess so new prop ordered in case the old one is too damaged but thanks for reply and also if anybody hears a squeaking sound from the front end and you think brakes always check your prop as well...

hi I have a problem with what I think is the n/s wheel hub I had to change the split boot on that side and when everything was out I tried the wheelhub for grating but it seemed to be OK everything put back now I have a squeaking noise when not under load only on acceleration no noise when going...

hi I have a problem with what I think is the n/s wheel hub I had to change the split boot on that side and when everything was out I tried the wheel hub for grating but it seemed to be OK everything put back now I have a squeaking noise when not under load only on acceleration no noise when...

Thanks for that so I'll go ahead and get them then much appreciated

hi does anybody know what o2 sensor I should be putting in my car which is a 1997 MY 4.6 with a zavoli lpg system fitted I have found the correct one on island 4x4 but they say not for use on vehicles with LPG I emailed them for advice about which I should use but all I got was no can't help you...

hi all I have purchased Bergen fuel pressure tester but none of the Schrader adopters seem to fit all too big am I missing something here or is the p38 Schrader valve really small have all sorts of other adopters but nothing fits other than taking stuff off the engine to put it onto anther fuel...

Thanks everyone for your replies I will get it off the compressor then and find out the dimensions then and hopefully get one ordered

Hi Does anybody know where to get the bearing for the pulley and the clutch plate on a 2.5 dse a/c compressor after my last post about it squealing went back out and tried it for movement and I can feel a very slight move of the clutch and when spun a very slight rubbing noise if I have to I...

Hi thanks wammers I tested them for play and to make sure they turned smoothly and couldn't feel or see any movement or roughness but I'll certainly redo the tensioner as you've described it because it was a new belt so it could be overtight I'll let you know when I've retested it thanks again

Hi all I have a slight problem in that I changed my tensioner mounting bracket and all was well belts went on fine looked to be running true but now there is a squealing coming from the pulley area have put wd40 on to find it but noise just stays the same could I have over tightened the Belt...

Thanks everyone for your advise I'll get him back round then

hi does anybody know how I remove the belt tensioner bracket from my 2.5 dse as when my daughter started it this morning she hard any almighty clang turned engine off straight away and came and got me , on inspection the bracket that holds the pulleys has sheared off and broken the fan as well...

Thanks for that wammers I'll get some ordered

Oh great thanks for that will have a look

Hi all does anybody know what size or where I can get the 3 bolts for the thermostat housing on a 2.5 dse as stupidly whilst changing thermostat I sheared on off in the engine side have got it out with patience and mole grips but now need new bolts to finish job off typically everything else was...

sorry I know this has been covered on here before but I can't find my problem you see the key will start the car but not unlock the doors except manually I have tried the hold in the lock button turn to lock back to centre hold the unlock button turn to right a hell of a lot of times but still...

Hi Thanks for replies,wammers yes the filler / level plug so will try T60 and Jamesmartin it looks clean inside I shone a torch inside but looked ok but I will give it a go with a pick or something