Search results

Mot advisary to renew rear brake pipes. The short ones between flexi pipe and brake cylinder. Measured them up and found that the union on the cylinder I could get a 11mm spanner on but the union onto the flexi pipe it was a 10mm. That was the same for both sides.Whats going on. I thought that...

I just thought I'd add this. After about 03 the air sensor seems to be in the air intake between the air cooler and egr.Mine is 03 and has the sensor fitted but no connection any where. What is it for?.I can only presume that the hose had blown and who ever replaced it has fitted a later pipe...

Hi I was looking at your album for replacing crankcase filter for new BMW filter. I've got a freelander TD4 on an 03 plate. Can you please tell me what is the electrical connection on picture 10 on the pipe running from left to right in between the air cooler and the EGR. I have the sensor...

Hi all Just to let you all know I've done the job. Disconect the electrical conection. Remove the torx screws from motor which holds the black plastic cover. Pull the bottom of the plastic cover like mad. It wont break just bends. Hold the cover away from motor. I used a screwdriver. Get a...

Hi jazzlord Just to let you know that I've managed to do the job.Pulled the bottom of plastic and with a morror saw what I needed to pull to get it undone. Bought a new catch solinoid £43 ish job done.Thanks for your reply. Neilc

Hi jazzlord I read your post about freelander tailgate not opening. Mine is locked and wont open but window comes down.Anyhow I have taken the plastic trim off and can see the lock and all.I just want to get in there and manualy pull the lock open.I have undone the 2 torx screws but try as I...

Hi Guys My tailgate lock motor is knacked. How do I open the door.I've got the rear trim off and all and can see the motor. I've heard that you can release the lock by using a tent peg .Where do I position it and do I take out the bottom screw holding it ? any help appreciated

I had same on mine. Turned out to be fuel pipe rattling on bottom of the plastic tray that its mounted in.Take out the 2 arch liner plastic fixings. Turn ignition on but dont start.Pull flap back and put finger on the pipe.If its stops then thats your prob. I wrapped a bit of rubber just to...

Hi The cam sensor is to give your engine management info for start up. Once started it then relies on other sensors around your engine to keep it going. neilc

If it was a fuel filter or pump I doubt that your problem would be solved by filling up your tank.Sounds like something else.I woul maybe try a code reader to see what the fault was. neilc

Hi 03 plate and on with the td4 the fuel pump is in the rhr wheel arch.Turn ignition on and leg to the wheel arch you will hear it prime up. neilc

Hi Guys I changed fuel filter today and found the earth tag going to the filter was broke.What is this earth for. Pump and car seem to be fine even though I have not connected the earth back up ??