Search results

Haven`t found he time to clean it, it keeps me busy with the faults!

Sorry, that is one part that didn`t break on mine over the years...............it might be the next one so please post a solution if there is one.. Reg Markus

1. You did close all the doors? the Compressor is only working when everything is closed 2. Did you disconnect the Battery bevor you changed the Sensors? Otherwise.....find a Testbook or Nanocom! reg Markus

Thx Gents Parts number worked great, order is already placed. Problem solved in about 5 minutes!!!! I love this place! Thx again and good night

Hi Folks I had a problem with the front window. The :confused:bottom of the glas metal clamp, bracket thing, device:confused:whatz ever it is called, the thing that is fixed to the glas and then should be fixed to the regulator mechanism with two screws. This thing was not mounted on the new...

Sorry, my mistake ;-)

Easy without testbook. Simply disconnect the battery and wait maybe 20 minutes then change the sensor and reconnect the battery. The connector is a bit tricky to open and close, a bit easier if you unscrew the sensor first and then open the connector. Is a 10 minute job.

And it's for sure not the first stupid question from a newby:D:)

Hi, het yourself a Nanocom or Hawkeye, with your stealer calling 75 quid for every reading it will be a win in no time.

You can try with a left hand thread or with a large Torx Bit but be careful not to drill to deep. Anything dropping into the engine will cause a breakdown. If nothing helps or you think something has been falling inside the engine..............off comes the head.

Keep the Disco and sell the fender to one of the cool guys for silly money.

I think he knows how to send an international text, i got it straight away.:rolleyes:

One cylinder out of balance, i'd investigate further in that direction. I usually see equal readings for all 5.

Only thing that might help is go to Austria or Germany and find a garage there. If its not to far away for you.

Lookout for a removel tool for the Dana 44 Jeep axle. On XBAY for around 100€ new. I did 3 Discos now with this tool and it is realy working well!

Stabilizer link.......... I have to change them regulary, don´t know why

Evoquuueeeeee????:p

I think you kow what you are doing, work your way through these opinions and it might be sortet. Regards Markus

Thats just easy going, And only basic tools.

Nice post, problem research and solution all in one.