Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. I

    Whoops!

    Brake or carb cleaner.
  2. I

    Brake pipes and chassis number

    Mick It ain't that bad to do the nearside brake pipe, got mine in, in one peice it's not that easy to kink the pipe, as long as you are not to animal with it.
  3. I

    Brake pipes and chassis number

    :doh::doh: If you look at the thread (page 2) you will see pics of the condition of the brake pipes that i removed.
  4. I

    Brake pipes and chassis number

    Mick Dont bother joining the pipes, the part at the front is the easy part, i changed the two long pipes and the two short one's at the rear not long ago, i pulled mine out and they snapped they were so corroded and they were just an advisery a few months before. Have a look hear...
  5. I

    P38 Bleeding Brakes

    I have a few weeks ago done mine, new discs and pads all round, new front calipers, stainless flexies (4), front to rear brake pipes X2 and two other small ones at the rear, depressurised the brake as suggested, twice just to make sure, all the brake fluid drained out when the calipers and old...
  6. I

    Bearmach discs

    Mine is a 99 V plate and has never been off road, well apart from a field or two and country lanes. I thought that steel brake pipe were not used anymore :confused:
  7. I

    Bearmach discs

    Hi Davie I have just spent the weekend fitting my new discs, etc, i bought all this kit from mail order 4X4, as they are not that far from me, i went and ordered and collected, i also managed a fairly hefty discount :D Before After I also changed the brake pipes, i had an advisory on my...
  8. I

    How much is LPG in your area?

    Filled up at Ozon in Plymouth yesterday and they are now £0.80 ppl and now cash only. I think BOC in Lee Mill (between Plymouth and Ivybridge) was £0.78 last week and is 12 miles away from me.
  9. I

    1985 classic V8 fuel pump help

    Hi Woody I am sure that the early v8's (talking sd1) have a three wire oil pressure switch, once the oil pressure comes up it switches on the fuel pump, but there is an override when the key is turned and i think there is another wire attached to the starter for this perpose. So if you find the...
  10. I

    100mpg dse

    and there is something wrong with your fuel gauge, or your very rich :D, just seen where you live :doh: gauge is broken :D:D:D
  11. I

    P38 Battery

    Hi I have a Numax marine 110 amp, 1000 cca and it only just fits, 2mm taller, wider, longer and it wouldn't fit, was a bit of a struggle to get the cables on as they were reluctant to exit out there allocated route, Ohh and it don't seem to have much problem spinning the engine.
  12. I

    A front diff query and an EAS one

    Cheers for that and i bet the only way to find out is to remove a shaft, mine is a 1999> model with the banana intake manifold not the box type, i bet it still could be either. Also mine doesn't have the flexy coupling on the rear prop shaft, thought they all had them.
  13. I

    Heated seat repair pics

    Anyone tried these, bit pricey but if they do what they say on the packet. x2 Seats Carbon Fibre Heated Seat Kit 5-stage back/bum on eBay (end time 08-Feb-11 16:48:50 GMT)
  14. I

    A front diff query and an EAS one

    Cheers mate
  15. I

    Cam advice

    Fett Sorry but i only have the cam and valley gasket, lifters were used because i thought there were a couple of iffy ones from the previous kit i fitted, i have the set i took out they have less than 30k use, i will throw them in if you want. Ian
  16. I

    Cam advice

    Hi Tat I have a Viper Cyclone performance camshaft brand new, bought as a replacement for a piper that i thought let go after 30k, but found it was head gasket and a lifter failure. £95 including postage. http://www.realsteel.co.uk/section1.pdf won't fit a 4.6 v8 so not needed anymore. Ian
  17. I

    A front diff query and an EAS one

    I don't think this is a total highjack of this thread but here goes I have a lot of play in the front diff and from what i can make out it is a two pin unit, also i belive the rear is a four pin unit, question is can a four pin diff be fitted into the front, If so are there any disadvantages...
  18. I

    Labour figure

    Hi I have used a guy just off Muttley Plain, he changed my drive plate as it was not phyiscaly possible for me to do it, has a RR himself although L322, if you are intrested Pm me and i will find his number. Ian
  19. I

    P38 4.0 thor lack of power after 2000 rpm and not on all cylinders.?

    I dont think it is a service item, i bought stuff to service mine and got a fuel filter (in line type) at the same time, i serviced the car but could not find the filter so left it, i had the drive plate replaced and asked them to change the filter while it was on the ramp, picked up the car and...
  20. I

    P38 4.0 thor lack of power after 2000 rpm and not on all cylinders.?

    Jelly Fuel filter is in the fuel tank :D
Back
Top