Search results

So that means the gauge is bad? Or the sender?

Yes it goes to full when I ground it to the frame

When I take the green off sender the gauge goes down to empty

Ok this is my next problem. The fuel gauge stays on 3/4 tank at all times but the low fuel light comes on when I drain tank. Now would the sender be bad and low fuel light still work? I don’t want to buy a sender if it’s the gauge. How would I be sure?

I have fitted it into the housing now I have no idea where this connects to the firewall

Does anyone have a pic of there oil temp sender in the oil filter housing or in the sump I have a 1985 2.5na motor

Anyone know what adapter I need to fit the oil temp sender into the filter housing?

I need some help. I installed led turn signals and they all blink at same time when signaling left or right. I put 2 load resistors across the green power wire in the rear ones and they still blink toghether did I do something wrong?

Yea didn’t come up with anything. Wouldn’t the harness be the same on a military and civilian 1986?

Yea blank but a big one. Do you know what the wire color is that the sender would plug into on the firewall harness?

Nope no oil cooler and the side of oil filter has oil pressure sending unit and 2 other blanked off holes. I just got this a month ago and it has the oil temp gauge so I’m assuming at one time it was hooked up and worked

That’s off the bulkhead harness under hood.

Anyone have any idea what these wires go to? My book don’t show thEm they are on a 1986 2.5 they are in the engine compartment from the bulkhead. First pic is a 2 wire harness with a brown/yellow female and brown/white male Second pic is a single male green/looks like light brown

I looked can’t see any wires going to anything there you have a pic with where it would be?

Hello on my 1986 2.5na I have an oil temp gauge that’s hooked up but under the hood I see no oil temp sending unit or any wires besides the oil pressure sending unit. Can someone tell me what color the wire should be from firewall and where should the sender be?

Np. So if I order this it will save me from taking the front cover and belt off?

Hey

Please. Also idk if they ship to the USA I called there ## and it won’t go through

You have a pic of the tool mounted?

Thx bro how do you use that tool? And I have to see if they ship to the USA