Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. C

    front half shaft bearing

    hi all Got to replace front half shaft bearing on my 1979 series 3,how do you get the inner bearing sleave of the half shaft?.
  2. C

    upper link ball joint

    cheers guys,give it a good belt each side with hammers sounds good to me,give it a go in the morning if its not ****ing down or minus 10.
  3. C

    upper link ball joint

    Hi all what is the best way of getting upper link ball joint off the axle mounting,split pin out nut and washer removed,but the ball joint splitters i have are to small. Any help most welcome.
  4. C

    disco 1 wheels

    cheers Jimbot90 celtic
  5. C

    disco 1 wheels

    Hi Can anybody tell me if steel wheels (16x7)from a disco 1 will fit a sreies 3 ?.
  6. C

    output shaft bearings

    The play is up and down and side to side,not a lot of play but you can see and feel it.
  7. C

    output shaft bearings

    Got a bit of play in my rear output shaft bearing,just replaced the oil seal and noticed a bit of play on the shaft,any tips on replacing the output shaft bearings. Cheers Celtic
  8. C

    bulkhead outriggers

    Fitting new bulkhead outriggers,but the top of the new outrigger is about half an inch below the top of chassis rail. have bolted a new bulkhead to the uprights from the chassis and the gap from the top of the bulhead to roof is correct for winscreen to fit. wonder if any of you guys have had...
  9. C

    series 3 chassis

    Thanks guys just what i need. cheers celtic
  10. C

    series 3 chassis

    Has any body come accross plans of a series 3 88in chassis,showing measurments ie bulkhead outrigger to a given point. cheers celtic
  11. C

    sereis 3 chassis

    Has anybody come accross chassis plans for sereis 3 88in,showing measurments of chassis ie distance of outriggers from a set point. cheers celtic
  12. C

    90 engine No

    when you look up my engine No it says 90/110 petrol 2286cc 8:1 cr detoxed,what does the detoxed mean,coes i am sure it was never a **** head?.
  13. C

    Me fookin Transfer Box is leekin

    Not a big job mate,of with the front prop(mark the shaft flanges and axle and transfer box flanges so it goes back in the same place),undo the transfer box flange center nut,pull of the flange,pull of the oil seal sheild, prize out the old seal,clean the flange off ,make sure theres no dirt or...
  14. C

    Wheel spacers for 90

    Thanks guys i thought it would knock the crap out of the wheel bearings,glad you confirmed it.
  15. C

    Wheel spacers for 90

    can you give me some info on wheel spacers (30mm),has anybody fitted them so they can fit alloys on a early 90 are they any good?.
  16. C

    handbrake adjustment

    Yeh from north Cornwall
  17. C

    handbrake adjustment

    Sold me 110 they who bought it going to collect it satdee.
  18. C

    handbrake adjustment

    Hi Trewy gota do misses timing belt on her V W Polo,would like to go out with the S L P P E R S but gota ern some browny points running in the red with browny pointsgive us a shout next time.
  19. C

    handbrake adjustment

    Had same trouble with my 90 i took the prop of and drum took out the linnings ajuster and the plungers cleaned it all up(make sure you put the plungers from the operating lever the wright way around tappered end towards the back plate),Two clicks will hold on any Cornish hill .
  20. C

    90 insurance

    Just sold my 110 and now running a 1984 90,when i told my insurance company they said my 90 was classed as a van?. On the log book it says 4x4 light utility,it started life as a hard top but has had side windows fitted wich i told them,are they correct in classing this as a van?.
Back
Top