Search results

Thought I would update this as its been awhile and lots has changed. First up a picture of its first laning trip after its mot

Fantastic service thanks alot. Hopefully get to use it laning next weekend.

Here you go hope this helps Land Rover Discovery Rear Cross Member Floor Support - YRM Metal Solutions

Maybe force an error to be logged and see if you can read it. If you can't then you know there is a dodgy earth for the ecu or dodgy ecu its self.

I had a problem with my abs the light was on when I got it. I did the blink test but the check engine light flashed a 1-2 code. Took it to the landy specialist and he said it was a bad earth. But he never told me where.

Can you do the blink test with yours?

If it doesn't blink, doesn't it mean there is still a stored fault?

Its just a bolt at the back if I remember.

Hi Stu Are you still making these?

Its connected to the rear quarter panel. The washer jet twists anticlockwise and pulls out, mine has stopped working think its blocked so ordered a new one.

Well she has been in the local landy specialist because I couldn't get the abs blink test to workand gey moted, £300 later she was fixed it was a dodgy earth apparently and failed mot on a track rod end dust cover and washer jet packed in. Im pretty chuffed that my welding was upto scratch...

I got my rear side floor panels from yrm they need cutting and shaping, but the bit I cut off was used to patch in all the other holes around the shell.

Have you tried taking them apart and cleaning them?

Why does the warning light go out when I pull the warning light relay out? Everything ive read says it should stay on?

I have no idea what it is. Just found it whilst poking around to try and sort my abs problems, and noticed it and thought about the pictures you put on.

I have the same as you in the picture you posted before and mines a diesel.

Nice one cheers lads

Nice one. Cheers Brian.

Second thoughts it should be alright. I should be able to solder it in, if you give us a price with postage I'll send it over for ya cheers

No problem. Don't suppose there is a part number on it somewhere?