Search results

yes thankyou could the re programming be done with the nanocom with an experienced user or does it have to go to a dealer or landrover specific technician

hi all i have a discovery 2 td5 auto on a 2000 plate the ecu on it is msb101192 would i have to find an ecu with similar msb number or could i use anyone that is suitable for a 10p engine

I found a boost wizard chip connected to my map sensor yesterday and it was wired incorrectly and think it may of damaged my ecu If I was to change my ecu id reference MSB101192 for another ecu with the same MSB number would I still have to get my discovery 2 re programmed for it to work ie off...

The old loom may need flushing out with a contact cleaner or a brake parts spray if you used a new loom you may have to get it put on a novocom to check the condition of the ecu

Have you checked all cables to injectors connected properly did you hear the click when pushed on also check the connection of the loom into the injector rail may have bent a pin when connecting

over the last couple of days i have noticed that when i start my discovery 2 td5 the engine needs 5 minutes to get to that usual symphony of a roar. When revved now it just seems to be a duller non energetic sound my question is could this be down to a faulty map sensor or could it just be down...

Sorry its the 2.5 td5 discovery 2

Hi all new to group so hoping got this in the right section if not I apologise does anyone have a diagram of the wiring going to the connector for the map sensor colours and so on I know there are 4 brass pins but I could do with identifying the earth wire and voltage in other 3 wires thanks in...

Hi new to the group I have a manual discovery 1 300tdi and a auto discovery 2 td5 hoping to pick up some useful tips and information