Search results

Mine is Zavoli and starts and switches to gas within 10 seconds.

Get a tailgate mounted sub and amp from an ES? Is the wiring there in Discovery's to just plug and play?

Its play in the arm... I took the arm off when I changed the vac advance unit and looked in the bottom of the arm. There was just the little square plastic notch to locate into the dizzy. No spring??

I know usually its very minimal and was expecting that to be the answer for these motors too. However I have quite a bit. Hoping its due to worn arm and not distributor. Will have to go get a new arm tomorrow to see if it fixes it or proves I need a dizzy.

Hmmm, Ill have to keep an eye on things then. How long does yours take to warm up guys? Mine seems to take a while, I wonder if my thermostat is a bit iffy.

Just a quick one. How much side to side play should the arm have when located on the distributor? Cheers :)

It gets to temp when driving (just below half), then will rise a little to half way when going up slow hills and trundling about under load, then will drop back to just under half way when driving at normal road speeds again. Heaters are warm no signs of coolant loss or any head gaskety type...

I did wonder if it was just a Land Rover smell that I should ignore but thought it best to ask. :D

I've not had the Discovery long and have now noticed when youre going slow along little roads and lanes (sub 20mph), it smells as if its running hot hot. Temp guage is sitting perfectly half way and drops to about 5mm under the half way point when driving at normal road speeds. Ive pulled over...

If you can get a good 2nd hand Snap On 18v gun they are the dogs danglies. I couldnt be without mine now :)

I only bought one to get it going again till after the turn of the year when I get back to work. Ive been off since the end of July when I got knocked off my motorbike. So as you might imagine Im mucho skinto!!

Well I went and bought a new KYB shocker for £32. Came home to fit it and on proper inspection, something I should have done before going and buying the new one, it appeared that the bottom washer was missing and the threaded bit and nut had simply pulled itself into the rubber bushing. All...

Paul C.... its the threaded pin thats missing fella. Hope it now makes sense to others what Im talking about too :doh:

Had a quick look with the search but didnt come up with much. Basically Ive just started to get a knocking from the o/s rear. I reversed up a snow drift so I didnt have to get on the floor for a look, and it looks as though the mounting bolt on the axle has sheared off. Now Ive not had a proper...

She's barking up the wrong tree with me then :5bblush5:

Welcome mate. Where abouts you from?

Im in the North East. Sunderland lad :D

Welcome from another north east new lad. :D Might see you around fella

Other toys include... 2wd Sapphire Cosworth, currently getting its engine rebuilt and should be back out late 2011 E39 M5 Yamaha R1 for commuting, travelling to bike rallies and generally battering about in all weathers Yamaha R1 for out and out riding like a tit with the chaps on a...

Cheers for the welcome folks, had a sniff about the site and you all seem like a good bunch :D Minty Im in Sunderland. Im a seaburn lad.