Search results

came from a 525d bmw.

rovacom says its out,changed engine,ran mint in donor car,now its in rr its lumpy as feck! ?

how can you adjust injection timing ?,any help in midlands area would be great.:confused:

look on ebay.

will only work if you have a hi line becm,situated under drivers seat,pull bakc the plastic trim and look at the label on the top, if it has the letter H on it your ok,make sure you get the loom that joins the seats together when you buy the seats, stew.

any one know where the sensor is for the fuel temp can be found ?had car on rovacom and fuel temp too high,also injection timing is out any ideas ?.

any body know where i would find the sensor for the fuel temp ?,had car on rovacom and fuel temp too high,also injection timing is out,any ideas ?.

im changing it as iv swapped the engine and its running like a bag of ****e,on tickover its like its running on bout 3 cylinders,i know the engine is fine as i drove the donor car for bout three months to avoid this situation ?!?!,the fourth injector is the only thing i didnt swap,am i clutching...

p38

the one with the lead on it that plugs into the loom.

hi,does ayone know if the fourth injector is mapped to the cars ecu ?,or are they all standard?.:confused:

the loom should be all there apart from the loom from seat to seat,if your stuck for this loom i have one in my car doing nothing.

hi,electric seats will fit no problem,they will only work if you have a high line becm, situated under the drivers seat,if you remove fuse cover you will see the letter h or l on top of the module,if h your ok if l your not,however it is possible to have another high line becm re mapped to your car.

why not look for a good 525tds or omega diesel engine ?,same engine, if you buy complete car then you know the engine is ok,there are afew bits to swap ie sump,engine mounts etc,but cheaper than a recon .;)

try a.f. jamesons, summer lane, newtown,brum, not too far away from you.

dont forget to change the oil pick up when you change the sump,also bottom pulley if donor engine is non air con.

hi, can anyone advise on how to adjust the tickover on a 2.5d p38 ?.

my bro has his own body shop and i know when i had mine painted he had to buy a special primer for the plastic,id get you a quote but im in brum.

i cant see it being the fly wheel as this is the original one ,had no probs prior to engine swap,im thinking/hoping it may be a loom plug on wrong as they all looked the same to me ?.

whats an egr valve and where do i find it ?