Search results

Ok I thought as much, when you bell housing up? Keep it away from being damaged? How long roughly to get the box out and how much of a **** without a ramp? Once it's off is it worth doing all seals and replace bolts? Also thinking about a h/d torque converter from ashcrofts any thoughts?

Hi all, The faults are slowly coming through now daily on new ownership of my td5 but it's a land rover and you can't help but love it. And after years of 200 tdi' sand v8's I love the td5!!!! As you can see in the below pics I have an oil leak and after much reading about the 3 seals that...

Hi All, i have just purchased a nice 1999 Disco 2 TD5 and after not long of picking it up the usual land rover qwerks are starting to come out!!! When the engine is either hot or cold it doesn't matter there is a high pressure jet of air con refrigerant sprayed out of the bottom of the...

Yes very interested, what do you have in mind and where are you?

Where are you and what would you want? Do you have the gearbox tunnel as well?

Oh awesome yea if you can send some pics over have they got cards and glass and complete? If your coming down the m25, m3, a303 you will be going past me

I'm in need of the following: Carpet set for floor Rubber mat 1 piece that covers gearbox tunnel and floor Rubber mat set that covers seat box Gearbox tunnel and adaptor to bulkhead for lt85 v8 gearbox I also currently have series style doors with sliding windows but would like to swap...

Got the number guys does it indicate the year of the engine? Engine number 35do1148a Top number cr91351

Sorry forgive me STP? Are sump bolts re usable or do they need replacing?

Cool thanks mad hat man, any tips while doing it? Anything that can go badly wrong?

Right I've been told that big end shells are worn and are causing the low oil pressure which is why the light stays on at low revs then once hot it then stays on and is starving top end of oil which in time will later on damage head? Anyone got any guides or topic on doing it?

Thanks for asking that there what I would do to get in with RPI, no I haven't fitted new rockers and have no leaks at all it's the first land rover engine I've owned that doesn't leak oil for a change!!!!

I think I may have put the wrong grade oil in it god knows how. The temp gauge sits smack bang in the middle all the time now it's working but when it's sat in traffic for a good 15 mins a loud tapping starts and then gets worse like its tappet related noise?? Once driven away it then goes I...

Ok great thanks James. Yellow what's the best oil to put in the 3.9?

Hi everyone, my 3.9 has finally now had a couple of trips out and I've put 100 miles on it since the rebuild. What it has started to do though is show the oil light once it's warm when at idle and just above idle, then once pulled away or revved it clears. Is this just another v8ism or is...

Hi what would you take for the V8 Engine as I suspect mine is on its way out.

Hi mordzy, the mounts I welded were quite far forward. This was because I used a factory v8 90 gearbox so that the turret and gearbox tunnel fit like a factory did as I didn't want the gearstick to come through where the middle seat / cubby box is. This then became my governing point so I temp...

Thanks very much gents would explain why alternator isn't charging only big brown connected other 2 rammed and hidden down some copex trunking!

Can anybody tell me what each connection does please? I know big brown is to starter motor what are the rest?

Dr Evil how much would you want for this little lot?