Search results

Ok I have now checked again, There is on power on 87 or 30 when i turn the ignition switch to start, I get 11.63 volts , put the relay back in and it is clicking so the relay is working, but no power to relay terminals 87 and 30.

Sorry I am with you now, I have already checked them, I have 11.63 volts on both sides of all of them.

Could you send me the wiring diagram please

Am I in the correct place, the fuse board on the drivers side under the dash F7 is a 5 amp and f9 is a 15 amp

Ok I have power on both sides of F1 and F7 But no power on F5?

Thanks for that , So I am on the right track, Ignition on, No power to any terminal on the starter Relay? Checked all the fuses Switch??? Possibly Paul

Before I go to far, I am counting on the starter relay being the one still in with the writing on?. the 2 I have pulled are 4 pin but it looks like they should be 5 pin, as I go this as a non starter, are they the correct relays?. I have no power to any terminal on the relay with the lettering...

Ok I have read through the Link, I have now got a lot to work with. Please correct me if I am wrong, 1. if this was an immobilizer problem, It would not start by jumping the starter from the battery, as It starts and runs ? 2, Where are the relays and fuses I need to check ? The main one is...

Hi I am a newbee on this forum, I have a freelander 2003 TD4 2.0 Diesel auto that will not start on the key. If I turn the ignition on and jump the starter it starts, I am thinking a switch possibly in the gearbox. can anyone give me some help and a wiring diagram would be great. Thanks Paul