Search results

Don't know , all it had in the add was This Listing is for: STC1086 / PEB500090 300tdi Water Pump I shall be replacing it with a bearmatch one. Hopefully it will last a little longer :o

Don't know , all it had in the add was This Listing is for: STC1086 / PEB500090 300tdi Water Pump I shall be replacing it with a bearmach one. Hopefully it will last a little longer :o

Many thanks for the offer , but I have one on its way , infact I have 2 coming , I got a reply fromThe seller off eBay and he is sending me a replacement also (free of charge) so I will have a spare new one in the shed also :) Thanks against for your offer

yea , ive just sent them a message , if i get no joy i,ll maybe ask ebay if they can help

Fitted a new water pump on my disco beginning of November last year , bearing collapsed today and it chucked the aux belt off I knew I shouldn,t have tried to save a few quid by going on ebay for it Anyone recommend a good one I could fit and where to buy it ??? ,,,,,,,,,,,thanks

Tried searching , I keep getting everything but what im after , im getting door handles , door lock barrels , The door pin doesn’t fall back, it just doesn’t go high enough , I have to lift It the final 1/16” ish with the key

Hi guys , im having trouble with the central locking on my disco , it locks the doors no problem , but it will only open the passenger door , the levers come up on all doors but not far enough on 3 of them , I have to use the key to open the drivers door , and reach in to open both back doors ...

can anyone tell me if a defender will fit under a barrier that a discovery will ?? is there much difference in hight between the 2 ??

thanks guys , it was m12 , but not the what i would call usual m12 , it is the fine version , m12 x 1.25 pitch ,,,,,,,,,,,,,,,

the one that is on the end of the little shaft that the rear shock absorber hangs on and the thread that is on the other end (bottom) of the shocker ,,,,,,,,

can anyone tell me what the thread size is of the nuts that hold the rear shock absorbers in place , is it 7/16 UNF ,,,,,,,,,,MTIA ,,,,,,,:)

Thanks for all the suggestions guys , the clicking has now been cured , the problem was that 2 exhaust manifold bolts had come loose and had been lost , allowing the gasket to “chitter” , so it wasn’t clicking after all ,( wot do I know ) , 2 new bolts and a new gasket , problem sorted , ,,,,I...

Thanks for all the suggestions guys , the clicking has now been cured , the problem was that 2 exhaust manifold bolts had come loose and had been lost , allowing the gasket to “chitter” , so it wasn’t clicking after all ,( wot do I know ) , 2 new bolts and a new gasket , problem sorted , ,,,,I...

the clicking will speed up the faster i go , then when i change up a gear it will slow down or speed up if i change down ,,,,,,,,,,,

Hi everyone , I,m hoping someone can help me out here , my disco , (300 tdi) has developed a clicking sound,IT sounds as though its coming from the drivers side of the engine , it started about 200 miles ago , and I haven’t got a clue what it is , The noise is like when you put a piece of...

Hi everyone , I,m hoping someone can help me out here , my disco , (300 tdi) has developed a clicking sound,IT sounds as though its coming from the drivers side of the engine , it started about 200 miles ago , and I haven’t got a clue what it is , The noise is like when you put a piece of...

Just found and read this thread , and I have had the very same probs with my disco , ended up with new filter , new lift pump , and sedimenter clean out , and a good blow through of the fuel pipes , thought I had solved the prob , went to pick up HWMBO from work just go going again and the old...

update on the front push/tow bar Made my mind up to buy a front tow/push bar for my disco , couldn’t believe it when I was asked if I wanted a tow ball to go with it ,you would have thought they would be included in the price , fraid not , they are EXTRA !! (thought that was a bit...

If I remember rightly from my am cb days and the beginning of fm 2.5 seems a bit high ,1.2 to 1.5 was what we would aim for , if you can’t get it down any more , you could use a mobile antenna matcher , Zetagi MM 27 aint a bad one for about £15 off ebay,,,,,,,,,,,,,,,,

not a thing , its what i do now , had a go pushing it once and found it better ,,,,,,,,,,,,,,