Search results

This was one of the outer bearings !

Believe it or not, it wasn't noisey to that except for about 5 or 10 minutes before it lost its drive !

I'm surprised it even turned ! Didn't get no indication it was going until about 10 minutes before it went bang !

This was my original diff I took out, so you can imagine what the bearing looked like I had to change ! But the 90 for peanuts with bits wrong with it and this was one of the issues on its big list ! It got no wiper spindles or working motor, and an Isuzu trooper 2.8 fitted. Need to dig into...

NAR ! Tell her it's a man thing and she wouldn't understand !

Correct, I pulled the cv joint out on the N/S wheel, left the shaft in there and fitted a blank hub drive flange on the end, as long as one wheel would spin freely and the propshaft was removed and put in diff lock, it will get you home ! I always carry a few things about with me to pull me out...

Your right ! That's the way to look at things. Its a toy for me, it gets abused, it gets broke, it gets fixed ! It's only money, you can't take it with you ! What's a diff, £50 notes at the worse, the hole will weld up, it's only a crack !

I'm near Ashton pal, plenty of routes near you ! I go around delph and diggle which imwont be too far away from you ?

Can't believe my day yesterday ! Rear diff that I had all the issues with was fine except leaking a bit of oil from the flange seal ! Only ended up hitting my front diff pan on a rock and didn't find out till on the way home ! Lost all its oil and locked up on the A627M (what's ****ed me off...

I've sorted it now thanks ! In got a 300 midi disco that I ABSOLUTLY batter ! Got loads of spare bits and had a spare rear axle. So I took the diff out of that today and counted all the teeth, an it's a 3.54:1 which I need, it's a 24 spline and the oil was all brown and lumpy with signs off...

How much you want for it pal ? And would you bubble wrap it up and send it to me at my cost ?

I've worked it out to a 3.54:1 diff. Am I right ??

The rear diff I took out has 13 teeth on the pinion, and 46 teeth on the crownwheel. What ratio would that one be ?? As this is what I need to get to put it right. Does anyone have one for me in the Manchester area ??

It's got discs on the back. , and if I put a 24 spline in the back, Wouldnt I have the same issue ? as I've got a 10 spline in the front ?? Pretty sure these axles are off a 200tdi

Need more help/knowledge ! I know I've not fitted it the wrong way, in pretty sure it's impossible to do any ways as there is a slot in the bottom of the axle casing for the crownwheel to pass. I'm digging into it and I think my defender has got 200tdi axles on it. I know the diff I bought is...

Started off with loads of agro with my diifs, and also decided to fit my new engine while I've got it off the road, Can anyone shed some light on this for me first of all ?? Got a 90 defender with 10spline axles. My rear diff blew last week and I had to pull a half shaft out and remove my rear...

Hi all, hoping to get a bit of advice. I've got a 1990 H-Reg Defender 90 that I bought with a 2.8 Isuzu trooper engine (4JB1T) fitted in it by one of its previous owners. It's getting a bit noisey and lazy now, so I've bought a 300tdi engine to throw in it. I wondering what will be involved in...

I've been to Holme and done ramsden lane is it ?? I'm out tonight if you fancy it pal ?? We are going around delph and diggle and sadleworth tonight. I've had a mate plot me a route on my OS Map, started off on Lees Rd in Ashton at about 9pm and didn't get home till after 3am ! Wasn't really...

Where you based pal ? I go out quite often laning at night in the week, few good places not too far away from me ! There is only 2 of us that go out, so the more the merrier !

I took the chance and had a drive up there, nice bit track full of rocks and bolders, when I got to the top, there was 4 other discos and a jimny up there, they said the way I came up was cool as long as I didn't go anywhere off the track like the obvious signs of someone doing this and making a...