Search results

Hi guys the pipes under the inspection plate are very rusty where is the best place to get new ones cheers

got power to the plugs now but battery went flat but still cannot get the engine stop to go in

hi now i have replaced the plugs and it has no power to the ballast coil no power to the cabling someone mentioned the ignition switch being faulty any way to test this please cheers also cannot get the small engine stop handle to go back in

have changed the plugs and now cold start light wont light up have no power to the ballast have looked behind dash and found 2 cables going to the ballast have shorted together and here we go Lenka’s Got Some Nice Boobs | AttuGirls

hi italian dave how do you check pump timing sorry bit of a noobie i am goona look at the old girl on monday will post if i get her started

no i live on the flat

yea i think that will be next on the list

yea it is turning over very well

thats great i presume the ballast resistor is the coiled wire on the bulkhead would the odd plugs stop it from starting?

so i presume i should either 1 set or the other not a mix can anyone say which set i should have it is a y reg 2.25 diesel swb

where did you get your plugs from and are they all the same as my 1st one is different

hi thought about the easy start but have been told its not very good for the engine. but i will give it a shot thought about the battery was told it needs quite a high amp battery so got a 110 amp battery and it turns over really well. we did try jumping it first of all and the battery must not...

hi guys have just aquired a s3 diesel 2.25 and it has been stood for a few years probably 6-7 have cleaned out old fuel changed filters checked the glow plugs across the battery decent battery fitted all earths checked oil and water changed and checked the fuel gets through to the injectors but...

hi mate if it is over to the left then the bias plate has probably snapped they are only about £4. got mine from here Island 4x4 - Specialists in Land Rover and Range Rover Parts and accessories for all models. UK and worldwide mail order. - Island 4x4 - Specialists in Land Rover and Range Rover...

i fitted an electric fan it was from a mondeo and is about 12" and is wired to a dash switch

hi mine was very sluggish and noticed it smokes alot when started from cold i changed the glow plugs and found oil had seeped down and contaminated the glow plug and at the same time i cleaned out the intercooler and inlet manifold with parrafin. whilst these were sat in cleaner i also fitted a...

my 300 tdi just flew through mot i asked the mot guy about it and he said as long as it exits past the front axle it will be fine

sorry meant L reg

hi guys got a classic and need to replace the water pump any how to's available it has the serpentine belt have had a look and could not find one i am crap at searching though sorry cheers

all sorted bit of solder and hey presto windows working fine cheers guys:D