Search results

Will check

Hi all... Question I have wired in a glow plug relay for my 200tdi conversion from a TD, the problem is that i cant seem to get the light to come on on the dash. the bulb works and the wiring is in properly. I have change the relay from my mates 90 and still does not switch the light on...

Yes the fog light works with dip and side lights are on. and goes off when high beam is on but still works when you use flash...

cheers for looking have studied the Haynes for hours and cant figure it out

1986

Rear fog light not posh enough for front fog lights

think its the switch then!!!! Balls! Have tried another switch but it still did the same as the original........

I have got both wires connected to the hazard light switch. power going to it from purple wire and green wires. So it will pass mot then with the fog light going off with the main beam activated?? Cheers

Hi all I have nearly completed the rebuild of my 90 but still got problems with my electrics, the hazard light only want to work with the ignition turned on and the fog light goes off when you put main beam on but it still works when you use the flash. Any ideas any one????

Hi All Question to you intelligent lot are bonnet hinges handed??? Cheers

tight that is all i do

thinking of changing my steering wheel but i was told by craddocks that i need to count the splines on the steering column as their are 2 types!!!!!!!

arss. would have looked nice

Hi all Been offered a canvas back for my pick up 90, but it comes off a series 3 will it fit are they the same length??

rather you than me

That is what i meant. the bolt where the bulk head goes to the chassis out rigger. so use a standard washers

I guess that you use as many as you need. are they solid or stolid??

are they just basic washers???? on the big bolt??

i have the large aluminium shims between the angle brackets and the chassis. you say that their are washers between the large bottom bolts ether side.

Evening all Have been re-building my 90 over the past year but hit a problem have carried out a full re-build so chassis swap new bulk head new rear tub etc etc . but fitted my doors today and found that the door gad at the rear is crap. about 15mm at its worst on the drivers door back. I...